View Single Post
Old 11-01-2011   #3
Paul Workman
 
Paul Workman's Avatar
 
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,466
Default Re: Sliding IAC counts...

Quote:
Originally Posted by XfireZ51 View Post
Yes. They will change w Temps. If they're too low, try setting
Min Air on TB.
Ah! Then I'm not kaaraazee! (Well, mebbe a little Thanks for that tidbit, Mr Dom. As a matter of fact, I DID tweak my min air - thinking it might solve my occational decel stall issue. I'll wait till she's fully warmed up and tweak it back down, maybe a 1/4 to 1/2 turn - just enough to have IACs around 5 to 8 ish when hot. That may be at least a work-around. Per Marc's suggestion, I'm going to do an experiment with the TB secondaries to see if they are contributing a little to the amount of swing I'm seeing. If they're OK, then I'll just shrug and be happy with the reset min air screw.

Other than that, she's runnin' real fine - or as before, at least. Still have to figure out the tweak to eliminate the occasional hot-decel stall thingy. But, that's a post for another day....

Thanks, Dom. I'll let you know how that works.

P.
Paul Workman is offline   Reply With Quote