ZR-1 Net Registry Forums - View Single Post

gbmidyear66 · 09-09-2011

Tom - that is very intersting. I tossed out the paper clip when I bought my AutoXray (but have a good supply in my desk...)

Do you happen to know the procedure to retrieve the "H" codes from the CCM?

I am getting the intrermittent SES under normal city/highway (mixed) driving, usually starts to appear after about 10 minutes of operation, it seems to be getting more frequent though - happened 3 times on my 20 minute drive in to the office today.

I've been runniung a "custom" prom on a Moates adapter for a year now. I have the original AUAH (with the stupid CAGS and the stupid high idle until dead stop) - I may put that back in just to see if it makes a diff - but I already pulled the adpater to make sure everything was seated well.

09-09-2011	#8
gbmidyear66 Join Date: Feb 2008 Location: Vancouver, BC Posts: 251	Re: SES Light, But No Trouble Codes? Tom - that is very intersting. I tossed out the paper clip when I bought my AutoXray (but have a good supply in my desk...) Do you happen to know the procedure to retrieve the "H" codes from the CCM? I am getting the intrermittent SES under normal city/highway (mixed) driving, usually starts to appear after about 10 minutes of operation, it seems to be getting more frequent though - happened 3 times on my 20 minute drive in to the office today. I've been runniung a "custom" prom on a Moates adapter for a year now. I have the original AUAH (with the stupid CAGS and the stupid high idle until dead stop) - I may put that back in just to see if it makes a diff - but I already pulled the adpater to make sure everything was seated well.