ZR-1 Net Registry Forums - View Single Post

batchman · 07-05-2011

These are probably a long shot but hey, nothing ventured = nothing gained.

My car is a 91 but I'm looking to back-date my front spindles/hubs so I need the ABS wiring from front sensors to brain for an 88-90 c4 (style with seperate ABS sensor). This is so I can consume $100 hubs instead of $300 hubs. I have the spindles and sensors. So far I've only found the set on eBay but the seller (thankfully) readily acknowledges the connectors are all cracked on his example. Since I need to race in the rain that'd be um, not so good.

Also looking for a 24mm rear bar (from any D44 C4) and since this is a wish list, a hollow front bar and/or some decent end links for front bar would be *awesome*, as would reasonable 2-piece front rotors to fit the J55 brakes.

Almost forgot, need a steering column with no tilt play from any std-trans 91-93 c4, hopefully with the key or lock pulled.

Thanks for listening

,
- Jeff

07-05-2011	#1
batchman Join Date: Jun 2009 Location: I live at Devens, one run at a time Posts: 454	part seeks These are probably a long shot but hey, nothing ventured = nothing gained. My car is a 91 but I'm looking to back-date my front spindles/hubs so I need the ABS wiring from front sensors to brain for an 88-90 c4 (style with seperate ABS sensor). This is so I can consume $100 hubs instead of $300 hubs. I have the spindles and sensors. So far I've only found the set on eBay but the seller (thankfully) readily acknowledges the connectors are all cracked on his example. Since I need to race in the rain that'd be um, not so good. Also looking for a 24mm rear bar (from any D44 C4) and since this is a wish list, a hollow front bar and/or some decent end links for front bar would be awesome, as would reasonable 2-piece front rotors to fit the J55 brakes. Almost forgot, need a steering column with no tilt play from any std-trans 91-93 c4, hopefully with the key or lock pulled. Thanks for listening , - Jeff Last edited by batchman; 07-05-2011 at 05:33 PM.