Quote:
Originally Posted by XfireZ51
Absolutely agree. If you haven't been under there for a while, you are better off simply replacing everything while there. That includes pulling the starter and cleaning out the drain, possibly even rebuilding starter solenoid.
My recommendations are:
Accel Injectors
MSD Coil Packs
MSD 8.5mm Wire set
Put thin layer of clear silicone on all vacuum connections
Maybe pull Ignition Module, clean then re-do heat sink grease
Clean valley drain pipe
Tighten oil baffle bolts
|
Only he ain't stoopid...unless talking politics,
THEN watch out!
