Quote:
Originally Posted by BigBiss
Thanks all, I did change the alt without pulling the plenum,thinking that was the easier way to go. I had to pull the throttle body assembly though to get it off. I am going to check the injectors as Marc suggested, I will let you know.
Thanks for the feedback
Jim
|
That's why I asked if you removed the plenum. That should eliminate a lot of things. That said, it is certinetly possible that something unrelated to the alt. R&R has happened.
FWIW.....I just did the same job a few months back in the same manor you did. Check all your elecrtical connections again. Did you replace the TB gasket and retorque all TB bolts to spec? I found that it became a critical issue when I did mine.