ZR-1 Net Registry Forums - View Single Post - 91 ZR-1 Cutting Out Under Load

GregCrowe · 09-03-2006

As far as the TPS, they are not adjustable. Mine is .44V at idle and 4.4V at full throttle. You can loosen the 2 screws holding the TPS and move it just a tiny, tiny amount that doesn't even affect the numbers. This TPS does not have the adjustable slots like on earlier TPI motors.

09-03-2006	#28
GregCrowe Join Date: Sep 2004 Location: Oklahoma Posts: 111	Re: 91 ZR-1 Cutting Out Under Load As far as the TPS, they are not adjustable. Mine is .44V at idle and 4.4V at full throttle. You can loosen the 2 screws holding the TPS and move it just a tiny, tiny amount that doesn't even affect the numbers. This TPS does not have the adjustable slots like on earlier TPI motors. Last edited by GregCrowe; 09-03-2006 at 06:16 PM.