ZR-1 Net Registry Forums - View Single Post

A26B · 04-28-2011

Lee,
You will need to carefully check these rings out. The compression rings have a history of being too thin, resulting in side clearance on the top side of acceptable. They also are not as wide as stock rings, meaning they are not as well supported in the ring groove when compressed. They will work, but short life due to flutter & ultimately breakage, may occur.

If you buy them, please let us know your findings.

04-28-2011	#5
A26B Join Date: Dec 2003 Location: Arcadia, OK Posts: 3,399	Re: AM Rings? Lee, You will need to carefully check these rings out. The compression rings have a history of being too thin, resulting in side clearance on the top side of acceptable. They also are not as wide as stock rings, meaning they are not as well supported in the ring groove when compressed. They will work, but short life due to flutter & ultimately breakage, may occur. If you buy them, please let us know your findings. __________________ Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 *ZR-1*, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed.