ZR-1 Net Registry Forums - View Single Post

Daniel_Mc · 04-20-2011

Hey Aaron,
Finish fully securing the shock (Lower A-Arm and Upper Shock nut) before you attempt to adjust the spring perch on the sleeve. The sleeve will spin some on you but I usually just hold it with my hand, I’ve never had to put a wrench on it. Once the car is on the ground and settled you should have about 1/2 of an inch of rake front to rear on the car. Whose coil-over set up are you running?

Daniel

04-20-2011	#2
Daniel_Mc Join Date: Jan 2007 Location: Pineville, LA Posts: 584	Re: Front coilover adjustment question... Hey Aaron, Finish fully securing the shock (Lower A-Arm and Upper Shock nut) before you attempt to adjust the spring perch on the sleeve. The sleeve will spin some on you but I usually just hold it with my hand, I’ve never had to put a wrench on it. Once the car is on the ground and settled you should have about 1/2 of an inch of rake front to rear on the car. Whose coil-over set up are you running? Daniel