ZR-1 Net Registry Forums - View Single Post

91King · 08-13-2006

I did the same as Aurora40, bought some headliner material and one can of spray adhesive.

The only other advice I have is to be extra careful and gentle pulling the headliner off the roof panel. Mine was glued in pretty well so it took me some time to work it loose without doing too much damage to the foam. I used a thin and flexible putty knife to work the foam off the panel.

Just take your time and it will turn out fine.

08-13-2006	#7
91King Join Date: Jul 2005 Location: Colleywood, Texas Posts: 40	Re: Drooping Headliner I did the same as Aurora40, bought some headliner material and one can of spray adhesive. The only other advice I have is to be extra careful and gentle pulling the headliner off the roof panel. Mine was glued in pretty well so it took me some time to work it loose without doing too much damage to the foam. I used a thin and flexible putty knife to work the foam off the panel. Just take your time and it will turn out fine.