[Scrrem]

Originally Posted by secondchance

Rich,
Don't forget to practice Dr. Phil's "teeth and string" trick. After your header install, WAZOO will not accept anything but 32 bolts in the holes.

One method I discussed with Jim is cut the tough to get to holes on the flange in such a way that these bolts, second row from the front, bottom, are screwed in first except for 3/8" or so. With the flange cut, headers can be slipped on followed by the remaining bolts screwed in. This may avoid 2 hours per bolt for these 2 bolts.

Yun,You know it. I will also bring along my custom fabricated 8 MM wrench for those tight places.I guess I was so busy running to the parts store, I missed all the fun you and Jim were having on the drivers side.Rich