ZR-1 Net Registry Forums - View Single Post

secondchance · 03-01-2011

David,

Like I said I will be on the road this Saturday - somewhere between Cleveland and DC.

Rich,
Don't forget to practice Dr. Phil's "teeth and string" trick. After your header install, WAZOO will not accept anything but 32 bolts in the holes.

One method I discussed with Jim is cut the tough to get to holes on the flange in such a way that these bolts, second row from the front, bottom, are screwed in first except for 3/8" or so. With the flange cut, headers can be slipped on followed by the remaining bolts screwed in. This may avoid 2 hours per bolt for these 2 bolts.

03-01-2011	#3
secondchance Join Date: Aug 2006 Location: McLean, VA Posts: 3,730	Re: Header install this Saturday David, Like I said I will be on the road this Saturday - somewhere between Cleveland and DC. Rich, Don't forget to practice Dr. Phil's "teeth and string" trick. After your header install, WAZOO will not accept anything but 32 bolts in the holes. One method I discussed with Jim is cut the tough to get to holes on the flange in such a way that these bolts, second row from the front, bottom, are screwed in first except for 3/8" or so. With the flange cut, headers can be slipped on followed by the remaining bolts screwed in. This may avoid 2 hours per bolt for these 2 bolts.