Join Date: May 2007
Location: Peoria, AZ
Posts: 9,119
|
Re: OBX Headers?
Quote:
Originally Posted by mgbrv8
As I stoop under the fire fight. I have a little off topic question, as I was removing my factory headers off the car I looked into the back side of each. I noticed that the drivers side headers catalytic converter was melted in the middle. Now would this be a sign of failing injectors, a failure of the smog system, a tune issue ( my car has a factory tune now but has had a tune on it in the past I believe), or a O2 sensor starting to degrade. It wasn't setting any codes before I tore it down and I had just finish a 10,700 mile road trip in it. Any constructive input would be greatly appriciate. Thank you gentalmen.
Dave
|
None of the above its possible that a piece of substrate broke off the honeycomb and melted into place. Impacts cause these to break apart before they ultimately fail. when they fail they start blowing chunks and the honeycomb tends to mold into a large ball of material. You will hear it as it sounds like a chock full of nuts under the car. This is a reason why a lot of us have gone to headers and Hi flow cats. Only other option is to find a NOS cat and exhaust manifold or hang a used one.
__________________
GOLDCYLON - 91 ZR-1 #2014
GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's)
GOLDCYLON - 11 CTS-V
Arizona State Director

91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat
90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat
11 RED/GREY CTS-V
|