ZR-1 Net Registry Forums - View Single Post

sammy · 12-13-2010

the analog guage sensor is located on the drivers side inj housing. if you replace the sensor as i did with one from autozone be mindfull that the guage might read different as mine did . i thought i had a real problem until i hooked up my scan tool and found that 180 deg. was now in the middle of the guage . if nachos isnt working you might just have not got the connection back on all the way . i dont know if it would effect the digital guage . i would call corey henderson he would know .

12-13-2010	#2
sammy Join Date: Jun 2010 Location: Lone Pine, CA Posts: 580	Re: Analog temp signal to dash the analog guage sensor is located on the drivers side inj housing. if you replace the sensor as i did with one from autozone be mindfull that the guage might read different as mine did . i thought i had a real problem until i hooked up my scan tool and found that 180 deg. was now in the middle of the guage . if nachos isnt working you might just have not got the connection back on all the way . i dont know if it would effect the digital guage . i would call corey henderson he would know .