Clutch master cylinder line
 

Anyone know who has these?

Re: Clutch master cylinder line
 

Saw a stainless flex one, but don't know where it came from:dontknow:

Re: Clutch master cylinder line
 

Lee,i took mine to a place near me and rebuild my line for around $60.

Pete

Re: Clutch master cylinder line
 

have you tried?
http://www.tld-corvette.com/products.asp?dept=905

they show them there

also at Corvette America

http://www.corvetteamerica.com/cf/di...ategoryid=X735

Re: Clutch master cylinder line
 

Pete where did you have it done....better than $150

Thanks

Re: Clutch master cylinder line
 

Here it is.
http://www.geibind.com/contact.htm


Pete

Re: Clutch master cylinder line
 

Anyone have the fitting sizes for this? Looking to have a line made.

Re: Clutch master cylinder line
 

Lee,

If you get the correct hose fittings, we can make them fairly easily. I made my fuel lines
on the 84.

Re: Clutch master cylinder line
 

Pegasus racing has pre made but only standard, with -3AN or -4 AN lines, need to know the flare fitting sizes to get a male adapter...also need to find meteric I assume.....you can get a premade line for about $28, plus cost of male fittings.

Re: Clutch master cylinder line
 

Well it appears the fitting is 12mm but I am not sure of the thread pitch went to autozone and True Value, all they had was a 12X1.25 and it would not go.


So either the male adapter is a M12 X1 or M12 X .8

Please let me know if anyone knows the size.