ZR-1 Net Registry Forums

ZR-1 Net Registry Forums (http://zr1.net/forum/index.php)
-   C4 ZR-1 General Postings (http://zr1.net/forum/forumdisplay.php?f=14)
-   -   check out some custom items (http://zr1.net/forum/showthread.php?t=7869)

RICKYRJ1 02-15-2009 01:08 PM

check out some custom items
 
5 Attachment(s)
Here are some pics of some of my winter projects. Half shalfs, drive shalf and wheel powder coated ZR1 logo is a decal applied and then cleared over. Center cap is a CT machining custome made(thanks Carter) Wheels are three pc., had the 2 barrels done blk and center as shown;sparkle silver. Feedback???

ZZZZZR1 02-15-2009 01:33 PM

Re: check out some custom items
 
Woah!!!!!!!!!!!!

Thats awesome!

:thumbsup::thumbsup::thumbsup:

tf95ZR1 02-15-2009 01:44 PM

Re: check out some custom items
 
Beautiful!
I can't wait to see what it all looks like on your car.
Or will you just mount it on your wall as art? :dancing

GOLDCYLON 02-15-2009 03:21 PM

Re: check out some custom items
 
Ricky is the wheel just a hubcap ie wall art?? I understand the halfshafts as the business end lol.

RICKYRJ1 02-15-2009 04:37 PM

Re: check out some custom items
 
Quote:

Originally Posted by GOLDCYLON (Post 54642)
Ricky is the wheel just a hubcap ie wall art?? I understand the halfshafts as the business end lol.


GC, the center hub needs to be put back together with the inside barrel. (40 bolts) The pic shown is of the front. The rear has a deeper lip to it. The red pin stripe around the perimeter is just a 1/8" temp. sticker. I think I am going to go to 3/16 to 1/4 red around the perimeter and maybe have it start at the edge of the rim. I have an artist who does alot of hot rods & custom bikes laying that down this week. Not sure, have to see it both ways and see what I like. I decided to go with the black PC because I have all of my suuspension polished. I think the contrast really makes it POP.

I picked up a C-beam(delivered yesterday)which will be polished and look sweet w/ the black drive shaft. I also have a new batwing coming which will be treated to the same thing. The linkage connected to the batwing will be a combination of black PC and polish. I'm going in the spare tire delete direction so all behind me will see how cool the mighty Z looks hot, top to bottom. Oh yea, each half shaft has the ZR1 logo on both sides, so when it spins the logo should be seen constant. Not that anybody will see but I polished my gas tank last week. Somebody stop me before they come take me away.:mrgreen:

Next step, performance mods!! I had Viper 4.10 dropped off last week.

QB93Z 02-15-2009 07:11 PM

Re: check out some custom items
 
Looking good Rick. I see you have been making good use of your time this winter.

Jim

carter200 02-15-2009 08:44 PM

Re: check out some custom items
 
Ricky,
Thanks for the kudos. Looking sweet :thumbsup:

ScottZ95ZR1 02-15-2009 09:21 PM

Re: check out some custom items
 
Absolutely awesome Rick. I hope to see your car in person one day.
And I hope my sickness does not progress to the point yours has. :mrgreen:

HAWAIIZR-1 02-15-2009 10:42 PM

Re: check out some custom items
 
Wow, awesome. You'll be able to go into the car show circuit and win some trophies with those custom mods. :worship:

GOLDCYLON 02-16-2009 01:16 AM

Re: check out some custom items
 
Quote:

Originally Posted by RICKYRJ1 (Post 54648)
GC, the center hub needs to be put back together with the inside barrel. (40 bolts) The pic shown is of the front. The rear has a deeper lip to it. The red pin stripe around the perimeter is just a 1/8" temp. sticker. I think I am going to go to 3/16 to 1/4 red around the perimeter and maybe have it start at the edge of the rim. I have an artist who does alot of hot rods & custom bikes laying that down this week. Not sure, have to see it both ways and see what I like. I decided to go with the black PC because I have all of my suuspension polished. I think the contrast really makes it POP.

I picked up a C-beam(delivered yesterday)which will be polished and look sweet w/ the black drive shaft. I also have a new batwing coming which will be treated to the same thing. The linkage connected to the batwing will be a combination of black PC and polish. I'm going in the spare tire delete direction so all behind me will see how cool the mighty Z looks hot, top to bottom. Oh yea, each half shaft has the ZR1 logo on both sides, so when it spins the logo should be seen constant. Not that anybody will see but I polished my gas tank last week. Somebody stop me before they come take me away.:mrgreen:

Next step, performance mods!! I had Viper 4.10 dropped off last week.


Well ok that make sense now its a multipiece wheel. Well it looks pretty darn nice. ! :cool:


All times are GMT -4. The time now is 11:13 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2025