ZR-1 Net Registry Forums

ZR-1 Net Registry Forums (http://zr1.net/forum/index.php)
-   C4 ZR-1 Technical Postings (http://zr1.net/forum/forumdisplay.php?f=9)
-   -   Crankshaft Torsional Dampener Pully (http://zr1.net/forum/showthread.php?t=7311)

billybaloneey 12-15-2008 09:23 PM

Crankshaft Torsional Dampener Pully
 
Does anyone know if the crankshaft torsional dampener/pulley assembly is unique to the 94 ZR-1? Or it it interchangeable with other dampener/pulley assemblies? If it is ZR-1 specific, does anyone know the availability of one...used or new?

Pete 12-15-2008 10:13 PM

Re: Crankshaft Torsional Dampener Pully
 
www.RockAuto.com $130

Pete

Jeffvette 12-15-2008 10:37 PM

Re: Crankshaft Torsional Dampener Pully
 
Quote:

Originally Posted by Pete (Post 50175)


Pete, have you actually checked out the aftermarket balancers?

Pete 12-15-2008 10:52 PM

Re: Crankshaft Torsional Dampener Pully
 
Quote:

Originally Posted by Jeffvette (Post 50176)
Pete, have you actually checked out the aftermarket balancers?

Ok,fine here's GM # 10225133 $240 :p
I figure some guys don't drive like some of us,an aftermarket balancer should be good for Sunday drivers.:)

Jeff,you know of a good aftermarket brand that works on the LT5 ,post up.

Pete

Jeffvette 12-16-2008 12:18 AM

Re: Crankshaft Torsional Dampener Pully
 
Quote:

Originally Posted by Pete (Post 50177)
Ok,fine here's GM # 10225133 $240 :p
I figure some guys don't drive like some of us,an aftermarket balancer should be good for Sunday drivers.:)

Jeff,you know of a good aftermarket brand that works on the LT5 ,post up.

Pete


Jeez Pete :razz:

I saw the aftermarket brands listed and have been meaning to buy one to check them out. Been on the back burner.

ATI has one, but the lead time and the cost is nuts.

billybaloneey 12-16-2008 09:41 PM

Re: Crankshaft Torsional Dampener Pully
 
Quote:

Originally Posted by Pete (Post 50177)
Ok,fine here's GM # 10225133 $240 :p
I figure some guys don't drive like some of us,an aftermarket balancer should be good for Sunday drivers.:)

Jeff,you know of a good aftermarket brand that works on the LT5 ,post up.

Pete

Thanks for the quick reply along with an after market source and the GM part number. But I'd still like to know if the 94 ZR-1 dampener is unique or can a base model Corvette dampener replace it?

Thanks again

Jeffvette 12-16-2008 11:00 PM

Re: Crankshaft Torsional Dampener Pully
 
Quote:

Originally Posted by billybaloneey (Post 50210)
Thanks for the quick reply along with an after market source and the GM part number. But I'd still like to know if the 94 ZR-1 dampener is unique or can a base model Corvette dampener replace it?

Thanks again


It's unique.


All times are GMT -4. The time now is 10:47 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2025