ZR-1 Net Registry Forums - no back up lights?

ZR-1 Net Registry Forums (http://zr1.net/forum/index.php)

- C4 ZR-1 Technical Postings (http://zr1.net/forum/forumdisplay.php?f=9)

- - no back up lights? (http://zr1.net/forum/showthread.php?t=6894)

detch

10-19-2008 09:17 PM

no back up lights?

I just purchased a 95 and the back up lights don't work, the bulbs and fuse are good, the switch at the transmission has been replaced but still no BU lights. The formal owner had a B&M shifter installed, any ideas on what could cause this or what to do next?

thanks:icon_scra

GOLDCYLON

10-19-2008 11:06 PM

Re: no back up lights?

Hmm you sure the switch is good?

flyin ryan

10-19-2008 11:59 PM

Re: no back up lights?

Quote:

Originally Posted by GOLDCYLON (Post 47031)

Hmm you sure the switch is good?

ditto:iamwithst

evl_twn

10-20-2008 02:53 PM

Re: no back up lights?

How hard are the switches to replace? :confused:

Chris_32212

10-20-2008 03:02 PM

Re: no back up lights?

sounds like there is an "open" in the circuit. that could be a break in the wire somewhere or it could be a bad switch. if you have a multimeter and know how to use it, that would be the best place to start.

Chris

Pete	10-20-2008 03:12 PM

Re: no back up lights?

Did you make sure the little slug was still in the hole when you replaced the reverse switch.

Pete

Jeffvette

10-20-2008 03:37 PM

Re: no back up lights?

Quote:

Originally Posted by Pete (Post 47076)

Did you make sure the little slug was still in the hole when you replaced the reverse switch.

Pete

That would be my guess.

flyin ryan

10-20-2008 09:59 PM

Re: no back up lights?

Quote:

Originally Posted by evl_twn (Post 47071)

How hard are the switches to replace? :confused:

no way to put it other than...a real B*T*H! i posted pictures a while back of an off-set 22mm wrench i carved up for the job.

detch

10-22-2008 06:22 PM

Re: no back up lights?

what is the little slug? and where would i get one? i did not change the switch so I don't know if it was replaced.

All times are GMT -4. The time now is 06:18 PM.