Chip info
 

anybody have information on which chip would be best for different applications? for example, i bought a genaric prom from exotic muscle that claimed a modest 12hp gain. but i have headers, B&B exhaust, and a light weight fly wheel. also i have heard of people programming their own chips??? is there some information on this somewhere?

Chris

Re: Chip info
 

marc haibeck

Re: Chip info
 

Use this link.....:thumbsup:

http://www.zr1specialist.com/

whole lotta great stuff at Marc's site!:thumbsup:

Re: Chip info
 

Or Doug Rippie Motorsports http://www.dougrippie.com/

Dont forget to add the power key is always on function.

Also Xfirez51 a member here called Dom has been know to play with the chip table values a little.

Re: Chip info
 

i did my own for all my cars, Chris. i can help you out, if you need, but your probably better off going to Haibeck, not many better, closer to you anyways. i'm flat out building engines these days, PROM's aren't my main gig, ya know.

Re: Chip info
 

There is a lot of info in this thread regarding chips.

http://zr1netregistry.com/forum/showthread.php?t=852

:cheers:

Re: Chip info
 

Chris,

You should start here if you are really interested in learning.
http://www.thirdgen.org/techboard/di...uide-book.html

My car went through the same "evolution" yours has. Prior to P&P earlier last winter, I had put Watson's, Fidanza and B+B exhaust so I could have a calibration that would be compatible BUT, all tuning is a compromise unless its done specifically for your car using datalogs scanned on your vehicle. The fact that you're in Utah suggests that, due to "thinner air", your motor operates in different areas of the VE and SA tables mine does.