LT5 Oil cooler adaptor fs
 

I have for sale five billet adaptors to replace your factory oil cooler lines to AN style fittings. These are machined out of billet aluminum and bolt to you factory oil cooler. All you need to supply is a longer bolt ( I used a allen head for clearance) ,o rings, 2 3/4 to 12 AN fittings, 2- 90 degree 12 AN fittings, 2-45 degree 12 AN fittings and about two feet of hose. Thes part cost me $57 at the local supply house.
I am looking get $160 each for the adaptor only plus $5.00 shipping. So for about $230.00 you can have new leak free oil lines and keep your factory oil lines.

I have five to sell but can have more made if demand is there.
http://i133.photobucket.com/albums/q...adaptor006.jpg
http://i133.photobucket.com/albums/q...adaptor005.jpg

http://i133.photobucket.com/albums/q...adaptor004.jpg

http://i133.photobucket.com/albums/q...adaptor003.jpg

http://i133.photobucket.com/albums/q...adaptor002.jpg

Re: LT5 Oil cooler adaptor fs
 

Trade?

Re: LT5 Oil cooler adaptor fs
 

No thanks..

Re: LT5 Oil cooler adaptor fs
 

how do you want payment?

What size is the allen to use?

Re: LT5 Oil cooler adaptor fs
 

IM me for payment address. Bank/Casher check is fine. I think the allen is a 6mm fine pitch. Check the bolt when you remove the old one.

Re: LT5 Oil cooler adaptor fs
 

I think I might take one of those from you

just in case

Re: LT5 Oil cooler adaptor fs
 

If you don't mind me asking, what makes this item cost $160? :confused: Can you please share some photos of an install? Thanks!

Re: LT5 Oil cooler adaptor fs
 

Ill get some photos when I have a chance later today.

Go to a machine shop and get some prices on custom CNC machine work. Not cheap when you only need a small quanity.

I had six made so with Polo and Jeff that leaves three left.

Re: LT5 Oil cooler adaptor fs
 

http://i133.photobucket.com/albums/q...daptor2002.jpg

http://i133.photobucket.com/albums/q...daptor2001.jpg

Re: LT5 Oil cooler adaptor fs
 

That where the money is. That first 4 hours at the machine shop. Now you can send one to China and have it copied for $25.00 each if you buy 10,000 units:jawdrop: