c5 Z06 Calipers
 

I am thinking about upgrading to the c5 Z06 Calipers front and back. the questions I have are:
1: is it a simple bolt on replacement?
2: should I then use c5 Rotors and brake pads?
3. on the rear how will it effect the Ebrake?

Thanks for the help in advance!

Re: c5 Z06 Calipers
 

You need to talk with Jeffvette

http://i7.photobucket.com/albums/y292/kpie/C6_brake.jpg

C5 rotor does not work with C6 Z06 14x1.250

Re: c5 Z06 Calipers
 

Opps I ment c5 rotors.. :rolleyes:

Re: c5 Z06 Calipers
 

Paging Jeffvette

Re: c5 Z06 Calipers
 

Yes it's simple. When doing the fronts and with the bleeding, it should take no longer than three hours start to finish.

You can, or you can use base C6 rotors. Pads I recomend the Hawk HPS. I would also recomend using the base C6 caliper as it is a better piece than the C5.

Don't worry about the rear, just refinish the rear caliper to match the front.

http://www.pnwzr1.com/images/Brakes/88-96_Adapter.jpg

Re: c5 Z06 Calipers
 

Thanks Jeff! Do I need any adpters for the new calipers? or will they just bolt right up?

Re: c5 Z06 Calipers
 

Added picture in my above post showing my bracket.

Here is a link to the instructions
http://www.pnwzr1.com/brake_install.htm

Re: c5 Z06 Calipers
 

Here are some shots showing the difference between the C5 and C6 calipers.

http://www.pnwzr1.com/images/c5a.jpg

http://www.pnwzr1.com/images/c6a.jpg


http://www.pnwzr1.com/images/c5b.jpg

http://www.pnwzr1.com/images/c6b.jpg

Re: c5 Z06 Calipers
 

I like those!! What would a complete setup cost for those thinking about it, Jeff?

Re: c5 Z06 Calipers
 

Will they fit with the stock 5 point rims?