ZR-1 Net Registry Forums

ZR-1 Net Registry Forums (http://zr1.net/forum/index.php)
-   C4 ZR-1 Technical Postings (http://zr1.net/forum/forumdisplay.php?f=9)
-   -   couple a quick ?'s (http://zr1.net/forum/showthread.php?t=4298)

32valvZ 11-20-2007 09:21 PM

couple a quick ?'s
 
First, why does my LTPWS light come on everytime I drive for a little while? I dont have any air loss in any tire.

Second, does anyone know a part number for the reverse light switch on the ZF.........I assume it would be the same as a regular C4 with the ZF, but I want to double check that.
TIA

Jeffvette 11-20-2007 09:38 PM

Re: couple a quick ?'s
 
LTPWS is garbage. My suggestion is to pull them out as they are a hazard when driving at speed. But more than likely the power generator is going out on it.


Back up light is #10159402

32valvZ 11-20-2007 09:48 PM

Re: couple a quick ?'s
 
Quote:

Originally Posted by Jeffvette
LTPWS is garbage. My suggestion is to pull them out as they are a hazard when driving at speed. But more than likely the power generator is going out on it.


Back up light is #10159402

just to reiterate...this is the switch on the tranny...not a light correct?

Jeffvette 11-20-2007 09:54 PM

Re: couple a quick ?'s
 
Correct, it's a pain to get out.

32valvZ 11-20-2007 10:10 PM

Re: couple a quick ?'s
 
Quote:

Originally Posted by Jeffvette
Correct, it's a pain to get out.

Ok, thanks Jeff...yea, it will be a tight area to fit a wrench in, but I think I can get to it......I can always "manipulate" one of my old non Snap-On wrenches to fit up there or an old socket. It almost looks like if I were to take a drift and tap it with a hammer, I could break off the plastic enough to easily get a socket to fit in there with a small breaker bar.....

Should I expect my local GM dealer to have this?

Jeffvette 11-20-2007 10:14 PM

Re: couple a quick ?'s
 
I would not expect them to. The Reno warehouse shows 2 in stock and the LA warehouse shows 6 available.

32valvZ 11-20-2007 10:18 PM

Re: couple a quick ?'s
 
Quote:

Originally Posted by Jeffvette
I would not expect them to. The Reno warehouse shows 2 in stock and the LA warehouse shows 6 available.

Yea, I basically meant they can order it for me if I ask for that specific pt#...sorry for being unclear. thanks again....:cheers:

Aurora40 11-22-2007 11:07 AM

Re: couple a quick ?'s
 
FYI, I ordered the switch from Bill B, and he sent along a tool he'd fabbed up. Worked like a charm, and I shipped him the tool back along with a check.

Jason 91 11-22-2007 12:50 PM

Re: couple a quick ?'s
 
I need to do the same thing to mine. What is the special tool?

Thanks,

Jason

Aurora40 11-23-2007 11:44 AM

Re: couple a quick ?'s
 
It was just a box wrench only he like welded on another box wrench head IIRC, so it was deeper.


All times are GMT -4. The time now is 11:08 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2025