Re-wiring the power key
 

Sorry if this topic has been covered but I have combed the threads and not found anything on it yet. I have the center console apart for stereo reasons and was wondering if anyone knew how to wire the power key so it is always on? I'd rather do it now while everything is apart...

Re: Re-wiring the power key
 

What year? Best bet is to modify the calibration to startup in Full Power mode.

Re: Re-wiring the power key
 

1991.

Re: Re-wiring the power key
 

Most do this with a custom chip---fans on at lower temps---elim of cags 1-4 shift---changes to the performance curve ---and key always on--

all are typical of a mod chip change out---

check out the long running thread on "what chip do you have" for mfg of the various chips and what everyone had to say about them!!!

Re: Re-wiring the power key
 

i was wondering... what is the way to do this on a 90? i have always heard the chip and the midamerica plug only works on the 91-95. is the only way to direct wire it on a 90?

Re: Re-wiring the power key
 

jump the terminals with a spade

Re: Re-wiring the power key
 

I used a paper clip on mine while I was waiting for a new key cylinder.

Re: Re-wiring the power key
 

a spade?

Re: Re-wiring the power key
 

http://store.nutsandbolts.com/electr...als-vinyl.html <<<< spades click on

never knew u could do a 90 that way-

Re: Re-wiring the power key
 

Iput a nice little rocker switch in instead of the key switch . it stays on all the time