DRM custom FX3 controller. Anyone remember these?
I have a DRM custom FX3 controller on the way from JG95ZR1 with the AA208-1 chip to go along with my car's DRM coil-over setup. I'll likely leave the factory controller in other than for Autocross/Drag days.
These things seem a bit lost to the bowels of internet history, and I could not find much detail on them other than one mode is "full stiff" and the other two modes will let you dial in more/less over/understeer. DRM appears to have offered various chips, but the differences between them I can't quite discern other than some references to possibly road course, drag strip, and autocross options. Does anyone have older DRM parts catalogs that may offer some hints? I'd love to track down the other chips if they're still out there, or burn them if I someone has the raw ROMs. I reached out to drm@dougrippie.com to see if they have any archival information or dusty old chips to sell. :cheers: A few threads with bits and pieces of info. https://www.zr1.net/forum/showthread.php?t=20057 https://www.corvetteforum.com/forums...ontroller.html https://www.corvetteforum.com/forums...ontroller.html |
Re: DRM custom FX3 controller. Anyone remember these?
Here is what the most recent DRM catalog I have says about there FX3 controller and PROM?s
https://www.zr1.net/forum/picture.ph...pictureid=5404 Brian |
Re: DRM custom FX3 controller. Anyone remember these?
Quote:
Thanks to ChumpVette I also now have this info on a couple different chips. -1991 / 1992+ A208/AA208 (Matches your image above.)
A217/AA217
|
Re: DRM custom FX3 controller. Anyone remember these?
A217 and AA217 go to full stiff front and rear above 25 mph in perf mode.
Graham |
Re: DRM custom FX3 controller. Anyone remember these?
Thank you, Graham. Are you aware of any others, like maybe one with stiff front and soft rear for weight transfer for drag racing?
Randy Rippie responded to me and they don?t have any archival info or dusty parts still around. Oh well. |
Re: DRM custom FX3 controller. Anyone remember these?
Yes, somewhere, I will try to find it.
Graham |
Re: DRM custom FX3 controller. Anyone remember these?
I have one of their modified controllers not sure if it works anymore.
|
Re: DRM custom FX3 controller. Anyone remember these?
Here is what I have
A218 AA218 tour stock sport full soft front and rear up to 25 mph; full stiff front and rear above 25 mph perf full soft front, full stiff rear up to 25 mph; full stiff front and rear above 25 mph A219 AA219 tour stock sport full stiff front and rear perf full soft front, full stiff rear up to 25 mph; full stiff front and rear above 25 mph A230 AA230 slalom 1 tour stock sport full stiff rear/80% stiff front perf full stiff front and rear A233 AA233 road race tour stock perf. with rear 80% of front (front stiffer) sport stock perf. perf stock perf. with front 80% of rear (rear stiffer) A300 AA300 tour full soft front and rear up to 75 mph; then full stiff front and rear until go back to 20 mph sport stock performance perf full stiff front and rear A301 AA301 tour full soft front, 50% stiff rear up to 75 mph; full stiff front and rear above 75 mph and back down to 20 mph sport stock performance perf. full stiff front and rear A302 AA302 tour stock sport front full soft/rear 50% stiff perf front full soft/rear full soft A303 AA303 Drag Race tour stock sport full soft front and rear until 60 mph; then full firm front and rear perf rear full firm; front full soft to 60 mph then full firm |
Re: DRM custom FX3 controller. Anyone remember these?
Never heard of these before. Shame they're no longer available. The A218 AA218 Graham mentions sounds like a nice upgrade.
|
Re: DRM custom FX3 controller. Anyone remember these?
Quote:
|
All times are GMT -4. The time now is 04:52 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2025