ZR-1 Net Registry Forums - Rear ride height question.

ZR-1 Net Registry Forums (http://zr1.net/forum/index.php)

- C4 ZR-1 Technical Postings (http://zr1.net/forum/forumdisplay.php?f=9)

- - Rear ride height question. (http://zr1.net/forum/showthread.php?t=31814)

Ozruss90

05-31-2020 08:36 PM

Rear ride height question.

To lower the rear end , there are longer bolts available through various vendors. Ok, well l noticed while the z was up on the hoist yesterday that there is approx 1 inch of useable thread left below the split pin currently. Would re-drilling split pin hole and winding down the nut to the bottom of the bolt achieve any noticeable difference. If so approx how much? Would it be by the amount the nut was wound down? Apologies if this is a dumb question, but if you don’t ask you’ll never know.

Z51JEFF

05-31-2020 10:21 PM

Re: Rear ride height question.

Buy new bolts,loosening the nut lowers the car.

32valvZ

06-01-2020 04:45 PM

Re: Rear ride height question.

Just hit the hardware store and buy new G-8 bolts that are longer with Lock nuts and youre golden... :cheers:

Ozruss90

06-05-2020 09:16 AM

Re: Rear ride height question.

Quote:

Originally Posted by 32valvZ (Post 309921)

Just hit the hardware store and buy new G-8 bolts that are longer with Lock nuts and youre golden... :cheers:

Ok, will do. About to order a set of Super Pro bushes for the whole car, front and rear. So will do the new bolts when l do that project over our winter break.
Cheers from🇦🇺

Jagdpanzer

06-05-2020 10:41 AM

Re: Rear ride height question.

Just installed SuperPro bushings on my 94. Ride and handling are much improved. You will be impressed.

Sent from my iPhone using ZR-1 Net Registry

All times are GMT -4. The time now is 05:28 AM.