ZR-1 Net Registry Forums
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

ZR-1 Net Registry Forums (http://zr1.net/forum/index.php)
-   C4 ZR-1 Technical Postings (http://zr1.net/forum/forumdisplay.php?f=9)
-   -   ECM options (http://zr1.net/forum/showthread.php?t=31508)

Clean87TA 03-11-2020 09:18 PM
ECM options
 
1 Attachment(s)
Finally had some free time.. y’all think this would work? For the 411 ls1 ecm?

XfireZ51 03-12-2020 12:45 PM
Re: ECM options
 
Even at $1k, a stock ECM would be a better, simpler solution unless ur considering FI or something exotic.

RussMcB 03-12-2020 01:06 PM
Re: ECM options
 
What the heck is that yellow thing?!

Clean87TA 03-12-2020 02:19 PM
Re: ECM options
 
Quote:
Originally Posted by XfireZ51 (Post 305948)
Even at $1k, a stock ECM would be a better, simpler solution unless ur considering FI or something exotic.
If I could even find a stock ECM.. I got spare parts it’s worth giving a shot if not MS3 set will do it

Clean87TA 03-12-2020 02:21 PM
Re: ECM options
 
1 Attachment(s)
Quote:
Originally Posted by RussMcB (Post 305950)
What the heck is that yellow thing?!
It’s my Turbo Camaro

-=Jeff=- 03-12-2020 02:30 PM
Re: ECM options
 
Quote:
Originally Posted by Clean87TA (Post 305954)
If I could even find a stock ECM.. I got spare parts it’s worth giving a shot if not MS3 set will do it
They are around.. I know someone with a few

BigJohn 03-12-2020 03:42 PM
Re: ECM options
 
Quote:
Originally Posted by Clean87TA (Post 305955)
It’s my Turbo Camaro

Cool I love it 😍

grahambehan 03-12-2020 06:08 PM
Re: ECM options
 
Ok, I'll say it, I don't fully understand this thread.
The 24 x reluctor wheel may work at the edge of the dampener. Ms3 will work with the stock 9x tho. So why?

Graham

-=Jeff=- 03-12-2020 08:11 PM
Re: ECM options
 
Quote:
Originally Posted by grahambehan (Post 305965)
Ok, I'll say it, I don't fully understand this thread.
The 24 x reluctor wheel may work at the edge of the dampener. Ms3 will work with the stock 9x tho. So why?

Graham
I believe the OP has a LT5 but did not get an ECM or maybe even a harness for that matter

grahambehan 03-12-2020 08:23 PM
Re: ECM options
 
0k, my statement still stands ,as to crank trigger input, regardless of harness. The megasuirt ecu will accept either input, 9x or 24x.

Graham


All times are GMT -4. The time now is 01:33 AM.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2025