Steering column extra black ground wire to column?
3 Attachment(s)
During my weekend project I removed the steering column to make some repairs -(and pull the brake booster), I bought a new multi-function switch from AC Delco. It is identical to the one that is in the car except there is an extra black wire in the cars ignition switch harness- it is a black wire that grounds to the steering column. It looks factory, the new Delco harness is a blank pin there. Anyone know, what that's about? Is is a 90 only ground for the airbag?
|
Re: Steering column extra black ground wire to column?
Quote:
|
Re: Steering column extra black ground wire to column?
Quote:
|
Re: Steering column extra black ground wire to column?
that black wire has nothing to do with the AIR BAG to my knowledge..
|
Re: Steering column extra black ground wire to column?
I'd think you can ignore the D in the harness. If you wanted to do something with it (the pig-tail ground) you could splice to the G in the harness. I'd think it's intention on column) originally is for the 'horn brush'.
See 8A40-0 in the FSM. Is D on the mating connector populated? If yes just move it from your old and swap. |
Re: Steering column extra black ground wire to column?
Quote:
|
Re: Steering column extra black ground wire to column?
1 Attachment(s)
Quote:
Release should be very straight forward. Attachment 11427 If you've a GM Dealer close and they have the GM Terminal Kit. Most should - get a Delphi 12020320. Tell dealer it's in Tray #1 if they have the J-38125 kit. |
Re: Steering column extra black ground wire to column?
Quote:
|
All times are GMT -4. The time now is 07:25 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2025