TPS adjustment
 

I don’t have the harness breakout tool but I need to adjust the new throttle position sensor on my car. I really don’t want to hack into my wiring loom.

Any one have a tip for doing it without the harness breakout tool? Went to order one from mid America but it’s out of stock.

My car is a 1991.

Thanks,

Reed

Re: TPS adjustment
 

A decent setting can be obtained by setting it midway between the limits, which places the TP Sensor horizontally level.

Re: TPS adjustment
 

It’s possible to rig a set up to get the setting.

Re: TPS adjustment
 

Until I got my Tech 1 scan tool I used a straight pen an a volt meter


Sent from my iPhone using ZR-1 Net Registry

Re: TPS adjustment
 

You guys should just spring for an inexpensive Android tablet and $35 for ALDLdroid along with an ALDL connector. U’ll use it over and over and over again.

Re: TPS adjustment
 

Sorry to sound like an idiot, but what do you mean by “straight pen”?

I’ve got the tps in now by just centering the bolts. All ready drives better than before, but I’d like to get it adjusted properly.

Re: TPS adjustment
 

Straight pin ?

Re: TPS adjustment
 

Using a straight pin you can puncture the wire insulation to attain a voltage reading without hacking the harness. (Purchasing the tablet etc.., as Dom suggested is the best way to monitoring a host of parameters. Money well spent!)

Re: TPS adjustment
 

The is setup works nicely for datalogging and for individual settings like this, I use it too. As Dom stated you’ll need a cheap android tablet, the ALDLDroid software and an ALDL cable (direct or Bluetooth). The website for ALDLDroid explains and has links to obtain all the hardware. Www.aldldroid.com.
Total investment should be under $100.
H
:cheers:

Re: TPS adjustment
 

I got a aldl android set up and I was going to use it to set the TPS voltage.

I've never used scanner before so this is going to be a stupid question but are the volts the top value on my data log? If not, how do I get the app to show tps voltage?Attachment 10974

Sent from my SM-T280 using ZR-1 Net Registry mobile app