ZR-1 Net Registry Forums - Flywheel Holding Tool

Page 1 of 2

Show 40 post(s) from this thread on one page

ZR-1 Net Registry Forums (http://zr1.net/forum/index.php)

- C4 ZR-1 Technical Postings (http://zr1.net/forum/forumdisplay.php?f=9)

- - Flywheel Holding Tool (http://zr1.net/forum/showthread.php?t=28438)

Ccmano

10-25-2017 11:08 AM

Flywheel Holding Tool

Curious what everyone is using to hold the flywheel when torquing the bolts?
H
:cheers:

BigJohn

10-25-2017 11:59 AM

Re: Flywheel Holding Tool

Dowel pins

-=Jeff=-

10-25-2017 12:16 PM

Re: Flywheel Holding Tool

Quote:

Originally Posted by BigJohn (Post 269740)

Dowel pins

Can you expand on this?

Jagdpanzer

10-25-2017 12:42 PM

Re: Flywheel Holding Tool

Wedge a short pry bar in between a cast in web or one of the bell housing dowels and the flywheel ring-gear teeth
http://i540.photobucket.com/albums/g...pso0itmr9d.jpg

Ccmano

10-25-2017 01:52 PM

Re: Flywheel Holding Tool

Quote:

Originally Posted by Jagdpanzer (Post 269744)

Wedge a short pry bar in between a cast in web or one of the bell housing dowels and the flywheel ring-gear teeth.http://i540.photobucket.com/albums/g...pso0itmr9d.jpg

Sent from my iPhone using ZR-1 Net Registry

Link is not working...;)

jss06c6

10-26-2017 10:34 PM

Re: Flywheel Holding Tool

2 Attachment(s)

Hans,

Should be able to slip the FW onto the dowel pin and start one FW bolt to hold the FW in place. Run the others in with a little red thread lock, then torque all if them in..[ATTACH]6718[ATTACH]6719

Sent from my XT1585 using ZR-1 Net Registry mobile app

LGAFF

10-26-2017 10:47 PM

Re: Flywheel Holding Tool

Why not a flywheel holding tool?

https://www.summitracing.com/parts/otc-4801

Ccmano

10-26-2017 10:47 PM

Re: Flywheel Holding Tool

Quote:

Originally Posted by jss06c6 (Post 269827)

Thanks Steve,

I was referring to holding the flywheel steady so it doesn’t rotate with torquing.

Going try this tool tomorrow.

https://farm66.staticflickr.com/6553...12525415_c.jpg

H
:cheers:

LGAFF

10-26-2017 10:56 PM

Re: Flywheel Holding Tool

Amazon Prime

https://www.amazon.com/Performance-T...flexwheel+tool

jss06c6

10-27-2017 07:13 AM

Re: Flywheel Holding Tool

Quote:

Originally Posted by Ccmano (Post 269829)

Thanks Steve,

I was referring to holding the flywheel steady so it doesn’t rotate with torquing.

Going try this tool tomorrow.

http://a65.tinypic.com/2ni1z52.jpg

H
:cheers:

Got it, now I understand your note.. I didn't need one. Engine compression was sufficient to allow me to torque all bolts..

Sent from my QTAIR7 using ZR-1 Net Registry mobile app

All times are GMT -4. The time now is 09:45 AM.

Page 1 of 2

Show 40 post(s) from this thread on one page