shelby wheels
 

my shelby wheels stick out just a little in the front. not bad doesnt really bother me but i have seen pics of other cars and they seem to be tucked in more.
im aware some guys move the centers outside but even ones not turned around seem to tuck in more than mine. do yours stick out a little? my car is a 90.
also can some one with the centers turned around post or send me a couple close up pics so i can see how it looks,especially the front where the center meets the barrel?

Thanks Ron

Re: shelby wheels
 

I think -=JEFF=- has done this ? He is running Shelby's

Re: shelby wheels
 

I have..

currently my fronts have the centers on the inside.. when they were on the outside, you need a 3/16" spacer if I recall right. Right now with my fronts the wheels are right on the edge, I would say need to find some pictures for you

Re: shelby wheels
 

Hope this helps

http://i.imgur.com/PA3MRPv.jpg?5
http://i.imgur.com/g86hNhz.jpg?2
http://i.imgur.com/jCdWa7A.jpg?1

Re: shelby wheels
 

yes that helps....are you running a spacer?

Re: shelby wheels
 

No spacers no rubbing.

Re: shelby wheels
 

Ron, What tire and size are you running on the Front.

Re: shelby wheels
 

Toyo r888. 275 35 18

Re: shelby wheels
 

Why did you move them back inside?

Re: shelby wheels
 

I had moved them to the outside with a spacer for C5 brakes, then back to the inside for the Brembo set-up I had. when I swapped the Brembos for Wilwoods, I left the wheels alone. I could swap them again, but I prefer the look of them on the inside. I have the rears on the outside, with a 3/16" spacer and have thought of swapping them back, just not in a rush to do that