Shelby Series 1 wheel owners>
 

I need a favor..

What bolts are on the perimeter of the wheels? 12pt 6pt? any info on them?

Pictures will help too, I have 4 wheels one of which has different bolts. I am looking for 40 to match my other 3 or going to replace them all

Re: Shelby Series 1 wheel owners>
 

Jeff

I'm 99% confident the shelby wheels used 12pt. Had a set a few years back and tried to find some pictures but no luck.

Re: Shelby Series 1 wheel owners>
 

Jeff, I can look when I get home on Friday.

Re: Shelby Series 1 wheel owners>
 

Jeff hope this helps

http://i576.photobucket.com/albums/s...psd2236fdc.png

Re: Shelby Series 1 wheel owners>
 

Thanks!!

Re: Shelby Series 1 wheel owners>
 

Jeff, Let me know where you are getting you wheel studs from. I might order a couple of sets.

Re: Shelby Series 1 wheel owners>
 

Will do once I figure it out

Re: Shelby Series 1 wheel owners>
 

I think I have on partial set of new lug nuts and one extra used rear wheel used on their prototype if anyone is interested...

That is, once my household goods are out of storage in April!

Re: Shelby Series 1 wheel owners>
 

Ron,

Let me know what you have when you dig it out in the spring..

I ended up buying a set of stainless bolts with nuts for all 4 wheels, figured they may as well all be the same.. these were on closeout as they are switching to polished stainless

Re: Shelby Series 1 wheel owners>
 

what tire sizes are you guys useing fronts and rear?