ZR-1 Net Registry Forums

ZR-1 Net Registry Forums (http://zr1.net/forum/index.php)
-   C4 ZR-1 Technical Postings (http://zr1.net/forum/forumdisplay.php?f=9)
-   -   OBX exhaust question (http://zr1.net/forum/showthread.php?t=16557)

Corbusa 01-24-2012 10:33 AM

OBX exhaust question
 
Gentleman , I am to the point of getting my OBX exhaust . But I do have a question. Will it cause the car to sound like its popping ( like the old glasspacks used to sound like ) when you let off the gas ? why I am asking is because I had an 88 Z51 and changed the Cat and both mufflers - I was terrible !!! I dont want that to happen on my Z..... Thanks for any help :)

secondchance 01-24-2012 10:42 AM

Re: OBX exhaust question
 
Quote:

Originally Posted by Corbusa (Post 131707)
Gentleman , I am to the point of getting my OBX exhaust . But I do have a question. Will it cause the car to sound like its popping ( like the old glasspacks used to sound like ) when you let off the gas ? why I am asking is because I had an 88 Z51 and changed the Cat and both mufflers - I was terrible !!! I dont want that to happen on my Z..... Thanks for any help :)

First, I recommend that you send your prom (I think this is a correct term) chip to Mrac Haibeck to remap based on having headers (and perhaps free-flow exhaust) installed resulting in better flow.

When you do this request that he program the chip to avoid decel-popping. My understanding is the popping comes from lean mixture when in decel.
I have OBX headers and exhaust w/ reprogramed chip and I get zero popping.
You may also consider lower temp fan on, 1-4 shift defeat, etc...
http://www.zr1specialist.com/HAT%20W...alibration.htm

Corbusa 01-24-2012 11:48 AM

Re: OBX exhaust question
 
hummm OK , for now I was going to just get / install the exhaust and get the headers later, so will I need the prom thingy reprogrammed for that? or I guess I could just wait until I get the whole system and put it all on at once...
Thanks for the help...

Kevin 01-24-2012 12:07 PM

Re: OBX exhaust question
 
I talked to marc about this and you don't need a retune for just the exhaust, headers yes. you can also have the chip done for headers and not put them on yet. won't cause any issues

secondchance 01-24-2012 06:06 PM

Re: OBX exhaust question
 
Sorry Corbusa! I miss read your post. Exhaust only, you should be ok.

Corbusa 01-24-2012 06:37 PM

Re: OBX exhaust question
 
OK , I appreciate all the help :) I'll probably order the exhaust next week , and put it back for later, then when I have the extra coins , I'll send the prom ...then the headers. 1 step at a time , and little by little..
I'm sure I'll be needing Marc's contact info again when ready ..
Thanks again Amigos

Kevin 01-24-2012 07:52 PM

Re: OBX exhaust question
 
www.zr1specialist.com


All times are GMT -4. The time now is 07:03 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2025