WTB: 1990 Cluster
 

Need one out of a 1990.

Prefer one not working as i need to get it rebuilt.

$$? or Trade.

Re: WTB: 1990 Cluster
 

I have the one from the body you got from me?

threestar40@mindspring.com

Rick =)

Re: WTB: 1990 Cluster
 

Rick,

It has to be for a 1990, no other years will work.

Re: WTB: 1990 Cluster
 

Come on peeps, Johnny you must have one??

I'll have to go to the dark side and buy that one over there if all else fails.

Re: WTB: 1990 Cluster
 

1990 and 1991 are interchangeable

what is different in the 2 that makes you need a 90?

Re: WTB: 1990 Cluster
 

I dunno I thought the DERM was the only diffeernt MY90 part and maybe the BCM next to the IP. If the Dark side is Corvette Forum Kurt hell I always find more parts over there than here. Just saying ;)

Re: WTB: 1990 Cluster
 

Sorry man all out. They go pretty quick

Re: WTB: 1990 Cluster
 

The 1990 & 1991 are different. the 90 oil temp gauge reads 260, the 1991 reads 280.

They may work, but they are different.

I'm off to the Corvette F0rum, sorry i tried.

Btw, if any of you old buggers find any 8000 Rpm clusters in Carlisle, buy them for me will you. I need only 90 & 91 MY's, all others not interested.

$300.00 for a used one, dead or alive.

Re: WTB: 1990 Cluster
 

Kurt will a 92 Cluster work in a 91 with all the features of the guages function? Any clue? GC

Re: WTB: 1990 Cluster
 

Short: No

Long:
the 90-91 LCD uses a different data pattern from the CCM then the 92-96. you could install a 92 ccm and cluster in your 91, I did on my dash conversion when I had a 91 dash in a 89. BUT I still did not have the extra digital gauges and I had a communication error between the CCM and ECM. you could possibly run a 92 MEMCAL in your 91, but I would verify that all the pins are the same. IF all the ECm pins are correct and you had the CCM, ECM, Cluster and MEMCAL for a 1992, it is possible that it will work.

That would be a cool thing to try, but keep in mind the CCM stores the mileage for the car as well