ZR-1 Net Registry Forums

ZR-1 Net Registry Forums (http://zr1.net/forum/index.php)
-   C4 ZR-1 Parts For Sale / Wanted (http://zr1.net/forum/forumdisplay.php?f=10)
-   -   Collecting parts for the pleneum pull... (http://zr1.net/forum/showthread.php?t=15246)

Paul in VA 07-25-2011 11:15 AM
Collecting parts for the pleneum pull...
 
Hi All:
If my pleneum is coming off for new injectors (which I intend on doing eventually) I also want to replace my coils. Any thoughts on aftermarket coils (like MSD , Accell, etc.) ? Should I also be collecting other parts for replacement at the same time?

bobbyhi 07-25-2011 11:26 AM
Re: Collecting parts for the pleneum pull...
 
On my first pull I also replaced the vaccum lines. Something to think about it. :cheers:

mike100 07-25-2011 11:32 AM
Re: Collecting parts for the pleneum pull...
 
Don't forget to get the recommended old style antifreeze- maybe 2 jugs if you are due for a coolant flush. May as well do that also.

FU 07-25-2011 11:40 AM
Re: Collecting parts for the pleneum pull...
 
Use the stock GM coil's. Problems have been noted at times with Accell-MSD coils.Plus they are a waste of $$.

LGAFF 07-25-2011 01:32 PM
Re: Collecting parts for the pleneum pull...
 
:wave:Ported plenum and IHs

Z51JEFF 07-25-2011 08:07 PM
Re: Collecting parts for the pleneum pull...
 
Quote:
Originally Posted by FU2 (Post 119644)
Use the stock GM coil's. Problems have been noted at times with Accell-MSD coils.Plus they are a waste of $$.
I replaced the coils in my car with new G.M. coils and one died at less than 7000 miles so I would rethink OEM coils.Ive got a set of MSDs.


All times are GMT -4. The time now is 02:52 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2025