newbie injector question
 

I have a 90 ZR1 with about 16k miles that I have original injectors still installed. Which injectors do you recommend to keep the ethanol at bay? David you have a post to a site for injectors but you didn't say which set you were recommending. I have a slight miss at 4k throttle and up sometimes and I am sure it is related to injectors.

TIA, Mike :confused:

Re: newbie injector question
 

rc or fic

Re: newbie injector question
 

I believe if using the FIC injectors the preference is the "new" not the rebuilt injectors....the price about doubles but I think it's worth the POE to get new ones. JMHO

:cheers:
Tom

Re: newbie injector question
 

I agree Tom!

FIC (new SS ones) They just started making Stainless Steel injectors recently and these are probably the best for long term use.

:cheers:

David

Re: newbie injector question
 

okay remember I'm a newbie....where do you buy them and is there a part number I need. What should they cost?

:cheers: Mike

Re: newbie injector question
 

Mike,

Sorry!

http://fuelinjectorconnection.com/sh...&productId=208

:cheers:

David

Re: newbie injector question
 

thanks David. Do those come with seals? Anyone in particular for plenum gaskets?

Mike :handshak:

Re: newbie injector question
 

http://jerrysgaskets.com/store2/root/ Jerry can fix you up with the soft goods and a lot of hardware also.

An alternate source is also:

http://whiteracingproducts.com/

:cheers:
Tom

Re: newbie injector question
 

Mike,

I recommend using Viton over Buna for ethanol blended fuels, which is virtually all you have in Texas. here's a short list of the items needed to replace the injectors.

http://jerrysgaskets.com/store2/root...&products_id=7

http://jerrysgaskets.com/store2/root...roducts_id=384

http://jerrysgaskets.com/store2/root...roducts_id=387

AND.... here is a tech data link for info to replace the lower primary injector seal. You can download this to your computer and/or print it out to refer to while you are working.

http://jerrysgaskets.com/store2/root...roducts_id=446

Re: newbie injector question
 

accel injectors