Secondary port vacuum solenoid
Picked up a 90 last month had it running great for two weeks after replacing the injectors. Now with key on engine off my pump was cycling so I pulled the plenum back off. Looks like the vacuum solenoid is leaking bad anybody know where I can get a replacement?
|
Re: Secondary port vacuum solenoid
Congrats on the ZR-1 score.
Info >>http://www.corvetteactioncenter.com/...0/002/article/ the part is >> Vacuum Solenoid with conical air filter (Part #1997222) We will see what others say for where for you to get one at. Welcome to the Brotherhood and the Zoo. Use the solutions thread for problem investigations and suppliers >> http://www.zr1.net/forum/showthread.php?t=11619 |
Re: Secondary port vacuum solenoid
I think that you can still buy one at the chevy store, no? If not either hit up either of these links:
http://jerrysgaskets.com/store2/root/ or: http://whiteracingproducts.com/ Those guys will be able to fix you right up. :cheers: |
Re: Secondary port vacuum solenoid
I went thru the same problem, Delco # 214358 works after minor bracket change ($20) also cross GM# 1997212 if nec? Make sure check valve is good (I missed & had to pull again) if nec a small check valve at plenum (drivers side) will work. The fuse for pump should be #17 / valet on dash pass. side.
Let us know how you do. |
Re: Secondary port vacuum solenoid
I looked at Jerry's website yesterday, didn't see any. White racing has one in a kit $620 ouch. Might need to call them and see if I can just buy the valve.
|
Re: Secondary port vacuum solenoid
Could you double check that Delco # I could not pull it up on GM Parts direct.
Thanks for the help Never mind, found it thanks. Quote:
|
Re: Secondary port vacuum solenoid
Holding the box in my hand, ACD# 214-358 with GM# 1997212 shown on the lid. Call me if you like to discuss the process I followed 407-391-9492.
|
Re: Secondary port vacuum solenoid
I found it. Thank you
Quote:
|
Re: Secondary port vacuum solenoid
Quote:
Solutions >> http://zr1.net/forum/showthread.php?t=11619 Would be great for members in the future to be able to do this and $ave.:dancing |
Re: Secondary port vacuum solenoid
Finally got back to working on the car today. I got the solenoid Belsy suggested, and swaped mounting brackets with the original. Now all is good again. Thanks. Guess I'll let my wife (it's her car) drive it for awhile before addressing the next problem.
|
All times are GMT -4. The time now is 10:16 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2025