ZR-1 Part contest part 2
Alright guys here comes part two.
Rules: 7 days for this contest, It ends 2/18 at 8 PM PST Must send email to contest@pnwzr1.com Proper answer part number or part name and description of where it goes and what it does. Prize: As some of you know I travel to some of the ALMS events. I have a SCCA hard card for media purposes and get some good access. Winner will get an entire event pass to a event I am traveling to for two people. You will get a private tour of the Corvette Racing pit area and other typical closed off areas. I may be able to get a media cred for you as well. If you would like to know more about this see last Heart of the beast publication where Dwight came down to Atlanta for Petit Le Mans. Events I will be going to... Long Beach, Salt Lake City, Atlanta and maybe Mosport or Road America. The last two are still being decided on. If the winner does not live close enough to any of the tracks a substitute prize will be offered. http://www.pnwzr1.com/images/Contest2.JPG |
Re: ZR-1 Part contest part 2
My guess is in.
|
Re: ZR-1 Part contest part 2
My guess is in, I am probably wrong
|
Re: ZR-1 Part contest part 2
Quote:
|
Re: ZR-1 Part contest part 2
Detailed guess sent ;) GC :mrgreen:
|
Re: ZR-1 Part contest part 2
Sent my guess in.
|
Re: ZR-1 Part contest part 2
In
(Like Flint) if yer old enough |
Re: ZR-1 Part contest part 2
Like your new avatar Ted.
|
Re: ZR-1 Part contest part 2
Hey Jeff,can i guess or am i excluded.:)
Is this piece from engine or trans,since i can't make out the size. Pete |
Re: ZR-1 Part contest part 2
Pete, you are more than welcome to guess.
:D |
Re: ZR-1 Part contest part 2
Quote:
PS Have I mentioned I like YOUR avatar? |
Re: ZR-1 Part contest part 2
Need some perspective here! Larger than a breadbox, smaller than a quarter? :icon_scra
|
Re: ZR-1 Part contest part 2
:cheers:
|
Re: ZR-1 Part contest part 2
Lucky Lager Twist Top
LGAFF 92 ZR1 #234 |
Re: ZR-1 Part contest part 2
My vote is in!!
|
Re: ZR-1 Part contest part 2
Guess is in...
Hans :cheers: |
Re: ZR-1 Part contest part 2
Getting a lot of replies. I guess some of you want to go to a race.
Keep it up. |
Re: ZR-1 Part contest part 2
Quote:
Damn I want to know if im Correct! |
Re: ZR-1 Part contest part 2
Gotta wait :D
|
Re: ZR-1 Part contest part 2
I guessed...and I'm pretty sure I am right...although I will be hookin up with you for the SLC race anyways... :D
|
Re: ZR-1 Part contest part 2
Alright guys, contest is closed. I'll go through emails and see who guessed correct and get a winner!
|
Re: ZR-1 Part contest part 2
So whats up jeff you need some extra fingers and toes to count the winning votes HAHAHA:mrgreen:
|
Re: ZR-1 Part contest part 2
LOL, alright.
The correct answer is..................... Crankshaft oil galley plug. This freeze plug fits in the rear of the crankshaft to seal off the oil galley. Correct answers were submitted by: Ken Thompson Hans Meyer Phil Wasinger John Mauriello Winner will be announced tomorrow morning. |
Re: ZR-1 Part contest part 2
:dancing
|
Re: ZR-1 Part contest part 2
Quote:
|
Re: ZR-1 Part contest part 2
Dangit....i thought it twas a freeze plug for the heads.....ohwell!
|
Re: ZR-1 Part contest part 2
Phhfft.........I knew that, cuz I just had my trans out, and mine has that mark on it we talked about, probably from getting the pilot bearing out at some point! What do I get Jeff?
;) Guys are lucky I didn't see this thread first. :D |
Re: ZR-1 Part contest part 2
Quote:
|
Re: ZR-1 Part contest part 2
Quote:
I heard the winner needs to follow Jeff around and hold his beer for him so he can take pictures of of all the hotties. ;) |
Re: ZR-1 Part contest part 2
Quote:
|
Re: ZR-1 Part contest part 2
Quote:
|
Re: ZR-1 Part contest part 2
Quote:
|
Re: ZR-1 Part contest part 2
Quote:
|
Re: ZR-1 Part contest part 2
Fat finger :D
|
Symantics!!!
Quote:
P. |
Re: Symantics!!!
Paul, I went back through my email, and I had 20 for this contest and didn't see one from you?
|
Re: Symantics!!!
Ah! Jeff...I must have missed the bit about email. I PM'ed you 2/12/08 at 10:27 (had to look it up).
Well, I PM'ed instead of emailing - my bad. I did feel good (lucky) to have ID'ed that little rascal. I specifically remember it as there was a warning regarding changing the pilot bushing against filling the well with grease and driving the bushing out hydraulically, less the oil gallery plug in the end of the LT5 crankshaft be dislodged and causing a serious oil leak (words to that effect in the FSM). No biggie. If you toss my name in the hat, dat be fine. If not, I'll be sure to email instead of PM next time. It's a fun game, none the less!! P. |
Re: ZR-1 Part contest part 2
Jeff, who won?
|
Re: ZR-1 Part contest part 2
That piece in the picture looks just like another part that I guessd it as If you ever want to pull the plugs out of your heads for the oil galleys they are just a miniture size to these
|
Re: ZR-1 Part contest part 2
Did I miss something? Who's the winner? If it's a tie I would imagine it's whoever answered first.
Hans :cheers: |
All times are GMT -4. The time now is 12:49 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2025