ZR-1 Net Registry Forums

ZR-1 Net Registry Forums (http://zr1.net/forum/index.php)
-   C4 ZR-1 General Postings (http://zr1.net/forum/forumdisplay.php?f=14)
-   -   Vegas in September (http://zr1.net/forum/showthread.php?t=3778)

4DSZR1 08-14-2007 12:25 PM

Vegas in September
 
I'm just curious......Who's planning on going to the PNW Gathering in Las Vegas?

Jeffvette 08-14-2007 01:21 PM

Re: Vegas in September
 
I'll be there. If I'm bringing a car I may haul it down. But I may be flying.

tf95ZR1 08-14-2007 01:24 PM

Re: Vegas in September
 
Quote:

Originally Posted by Jeffvette
I'll be there.

Jeff promised to bring some of the honeys in his avatar.
:dancing
I'll be there........

GOLDCYLON 08-14-2007 03:29 PM

Re: Vegas in September
 
Quote:

Originally Posted by tf95ZR1
Jeff promised to bring some of the honeys in his avatar.
:dancing
I'll be there........


Hmmm :eusa_shhh I heard the real story is Jeff has all those honeys and has no time to show up. :mrgreen:

cuisinartvette 08-14-2007 03:35 PM

Re: Vegas in September
 
I should be there this year.

PhillipsLT5 08-14-2007 10:37 PM

Re: Vegas in September
 
I will be there again
Goldcylon, you better be going

GOLDCYLON 08-14-2007 10:56 PM

Re: Vegas in September
 
Will need to check in with Household 6!!!! BTW

PS P&P and PC job is done. Awaiting two parts before the big reveal. Taking her to the Dyno tomorrow.

tf95ZR1 08-15-2007 12:41 AM

Re: Vegas in September
 
Quote:

Originally Posted by GOLDCYLON
P&P and PC job is done. Awaiting two parts before the big reveal. Taking her to the Dyno tomorrow.

Pics Pics!

cuisinartvette 08-15-2007 12:56 AM

Re: Vegas in September
 
Quote:

Originally Posted by GOLDCYLON
Will need to check in with Household 6!!!! BTW

PS P&P and PC job is done. Awaiting two parts before the big reveal. Taking her to the Dyno tomorrow.

Awesome! I was hoping to get some porting and headers done before this years event but it will have to wait til winter.
Oh well, someone has to be the slow guy :mrgreen:

GOLDCYLON 08-15-2007 01:15 AM

Re: Vegas in September
 
Quote:

Originally Posted by cuisinartvette
Awesome! I was hoping to get some porting and headers done before this years event but it will have to wait til winter.
Oh well, someone has to be the slow guy :mrgreen:

It took 4 months of planning and parts chasing. 3 weeks of assembly/disassembly and the support and counsel of Jeffvette, the ZF.Doc and Carter200 with some special engraving. Zethco hooked me up with the stainless bolts and part numbers. I am awaiting the camcover emblems for the reveal.

Heres a talley of what was done!!!

Porting and polishing of entire top end to include plenum, air horn and injector housings. Entire top end from Throttle shield cover to MAP sensor bracket was powercoated in Silver Metallic Paint with red and black lettering. All work done by Jeffvette.

Diassembly and assembly was completed by Bill B the ZF.Doc and his trusty helper. I chose to replace the following during the tear down.

Removed Original Injectors and replaced with RC SL4-205s (all the originals were rusted BTW)
New Plugs, Iridium of course
New Wires, Delco of course
4 New Delco Coil Packs
1 New Starter
2 New PCV Valves and PCV tubing
1 New MAP sensor but dammit I bought the wrong part (lol)

Carter provided Machined LT-5 Coolant Pipes, LT-5 TPI Cover and a ZR-1 Billet Oil Filter cover

Zethco hooked me up with Macallister for all the stainless hardware

Pics to follow, If I can get a kitchen pass after pulling off all these mods with Household 6 I will be in LV for at least a few days. :)

All these folks made this happen and the Permagrin continues to get wider. It all about the car and the people folks!! Goldcylon

cuisinartvette 08-15-2007 02:06 AM

Re: Vegas in September
 
Sounds nice! I left mine intact, a simple porting job I cant do withou probably going through and compulsively replacing everyhing under it wether it needs it or not. :icon_scra One thing leads to another all to often over here....Heck just pulled the radiator last year to clean it....It was down for an entire yeare with "what abouts".

Sure good at taking them apart though. :sign10:

tf95ZR1 08-15-2007 02:22 AM

Re: Vegas in September
 
Quote:

Originally Posted by GOLDCYLON
Diassembly and assembly was completed by Bill B the ZF.Doc and his trusty helper. Goldcylon

I didn't know Bill also did engine work.


Quote:

Originally Posted by GOLDCYLON
I am awaiting the camcover emblems for the reveal

Boy, so am I awaiting (2) emblems. Jeff??

cuisinartvette 08-15-2007 02:57 AM

Re: Vegas in September
 
Bill and his wife doing LT5s now?

GOLDCYLON 08-15-2007 08:43 AM

Re: Vegas in September
 
Quote:

Originally Posted by cuisinartvette
Sounds nice! I left mine intact, a simple porting job I cant do withou probably going through and compulsively replacing everyhing under it wether it needs it or not. :icon_scra One thing leads to another all to often over here....Heck just pulled the radiator last year to clean it....It was down for an entire yeare with "what abouts".

Sure good at taking them apart though. :sign10:

Its a while you are there approach... Hate to get her done and then dohh Wish I would have done that!! Adds to the project costwise but at that point it becomes MOD dust price wise. And from my view I have no idea if its been seen too in 17 years, my guess was probably not:thumbsup:

GOLDCYLON 08-15-2007 08:45 AM

Re: Vegas in September
 
[quote=tf95ZR1]I didn't know Bill also did engine work.

Yep him and his partner do, Including the heads matched machine porting. Its great to have him less than 20 Miles away!! ;)

Frankly I was happy he could take this job on!!!

GOLDCYLON 08-15-2007 08:47 AM

Re: Vegas in September
 
Quote:

Originally Posted by cuisinartvette
Bill and his wife doing LT5s now?

Negative just a collegue :o

And from what I saw he does LT-1s and LT-4s as well. He happiest when working Ive found :)

carter200 08-15-2007 12:13 PM

Re: Vegas in September
 
Quote:

Originally Posted by GOLDCYLON
It took 4 months of planning and parts chasing and the support and counsel of Carter200 with some special engraving.

Carter provided Machined LT-5 Coolant Pipes, LT-5 TPI Cover and a ZR-1 Billet Oil Filter cover

It all about the car and the people folks!! Goldcylon

Thanks for the kind words GOLDCYLON. It was a pleasure helping you and hope all else goes good:cheers:

jonszr1 08-15-2007 03:13 PM

Re: Vegas in September
 
I might show for the drag racing. just depends...........

GrayZ 08-16-2007 05:13 AM

Re: Vegas in September
 
Quote:

Originally Posted by jonszr1
I might show for the drag racing. just depends...........

I think you better wear jeans. although many of our sexy senior citizens
might appreciate your thought, I for one, vote no.

I don't think there is anyway i'm gonna make it to Vegas.:cry:


All times are GMT -4. The time now is 02:37 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2025