ZR-1 Net Registry Forums

ZR-1 Net Registry Forums (http://zr1.net/forum/index.php)

- C4 ZR-1 Technical Postings (http://zr1.net/forum/forumdisplay.php?f=9)

- - ECM options (http://zr1.net/forum/showthread.php?t=31508)

Clean87TA

03-11-2020 09:18 PM

ECM options

1 Attachment(s)

Finally had some free time.. y’all think this would work? For the 411 ls1 ecm?

XfireZ51

03-12-2020 12:45 PM

Re: ECM options

Even at $1k, a stock ECM would be a better, simpler solution unless ur considering FI or something exotic.

RussMcB

03-12-2020 01:06 PM

Re: ECM options

What the heck is that yellow thing?!

Clean87TA

03-12-2020 02:19 PM

Re: ECM options

Quote:

Originally Posted by XfireZ51 (Post 305948)

Even at $1k, a stock ECM would be a better, simpler solution unless ur considering FI or something exotic.

If I could even find a stock ECM.. I got spare parts it’s worth giving a shot if not MS3 set will do it

Clean87TA

03-12-2020 02:21 PM

Re: ECM options

1 Attachment(s)

Quote:

Originally Posted by RussMcB (Post 305950)

What the heck is that yellow thing?!

It’s my Turbo Camaro

-=Jeff=-

03-12-2020 02:30 PM

Re: ECM options

Quote:

Originally Posted by Clean87TA (Post 305954)

If I could even find a stock ECM.. I got spare parts it’s worth giving a shot if not MS3 set will do it

They are around.. I know someone with a few

BigJohn

03-12-2020 03:42 PM

Re: ECM options

Quote:

Originally Posted by Clean87TA (Post 305955)

It’s my Turbo Camaro

Cool I love it 😍

grahambehan

03-12-2020 06:08 PM

Re: ECM options

Ok, I'll say it, I don't fully understand this thread.
The 24 x reluctor wheel may work at the edge of the dampener. Ms3 will work with the stock 9x tho. So why?

Graham

-=Jeff=-

03-12-2020 08:11 PM

Re: ECM options

Quote:

Originally Posted by grahambehan (Post 305965)

Ok, I'll say it, I don't fully understand this thread.
The 24 x reluctor wheel may work at the edge of the dampener. Ms3 will work with the stock 9x tho. So why?

Graham

I believe the OP has a LT5 but did not get an ECM or maybe even a harness for that matter

grahambehan

03-12-2020 08:23 PM

Re: ECM options

0k, my statement still stands ,as to crank trigger input, regardless of harness. The megasuirt ecu will accept either input, 9x or 24x.

Graham

Clean87TA

03-12-2020 08:30 PM

Re: ECM options

Quote:

Originally Posted by grahambehan (Post 305970)

0k, my statement still stands ,as to crank trigger input, regardless of harness. The megasuirt ecu will accept either input, 9x or 24x.

Graham

As stated I have extra Ls parts laying around.. so why not.

grahambehan

03-12-2020 08:39 PM

Re: ECM options

Ok , just asking trigger wheel options with megasquirt, however you wish to do it is fine.

Graham

All times are GMT -4. The time now is 05:13 AM.