ZR-1 Net Registry Forums
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

ZR-1 Net Registry Forums (http://zr1.net/forum/index.php)
-   C4 ZR-1 General Postings (http://zr1.net/forum/forumdisplay.php?f=14)
-   -   Searching for a Fuel Line Clip (http://zr1.net/forum/showthread.php?t=21113)

dzim 09-03-2013 01:38 PM
Searching for a Fuel Line Clip
 
I am looking for a discontinued GM part number 10052168. It is a small retainer clip (bracket) for the fuel lines on a 1994 ZR-1 Corvette. The part sits just above the blower motor control module just forward of the firewall on the passenger side. It appears to be unique for the ZR-1 model as I have not seen it on the 1994 Corvette with the LT1 engine.

Thanks,
Dale Zimmerman
1994 Black Rose ZR-1
Lincoln, Nebraska

scottfab 09-03-2013 02:26 PM
Re: Searching for a Fuel Line Clip
 
ask on this thread. I bet it's the same part on a 90.
http://zr1.net/forum/showthread.php?t=21073

ZZZZZR1 09-03-2013 09:10 PM
Re: Searching for a Fuel Line Clip
 
Quote:
Originally Posted by dzim (Post 182008)
I am looking for a discontinued GM part number 10052168. It is a small retainer clip (bracket) for the fuel lines on a 1994 ZR-1 Corvette. The part sits just above the blower motor control module just forward of the firewall on the passenger side. It appears to be unique for the ZR-1 model as I have not seen it on the 1994 Corvette with the LT1 engine.

Thanks,
Dale Zimmerman
1994 Black Rose ZR-1
Lincoln, Nebraska
Dale

Can you take a picture of what you need?

Sent you a link to Kurt's site. He has the part #

:cheers:

David

Blue Flame Restorations 09-03-2013 10:14 PM
Re: Searching for a Fuel Line Clip
 
It's the same black plastic part used on the fuel lines underneath the car in two places.

dzim 09-04-2013 09:36 AM
Re: Searching for a Fuel Line Clip
 
David,
There is not much left of the clip on my car. Not sure a picture would do any good. Who knows how long the clip has been broken. However, it is there for a reason. When the fuel lines are not retained by this clip, they are free to vibrate. One of them actually rubbed through the insulation on the lead wire to the blower motor. That in turn blew a fuse. I have a temporary fix that uses two black zip ties to hold the fuel lines in place, but would like to find the correct clip if anyone has one?

Thanks,
Dale

dzim 09-04-2013 11:45 AM
Re: Searching for a Fuel Line Clip
 
Thanks for the information, Dynomite. Exactly what I need!!

Carter, if you are out there, what is the status on making this Fuel Line Bracket out of Billet Aluminum?

Thanks,
Dale Zimmerman

carter200 09-04-2013 10:27 PM
Re: Searching for a Fuel Line Clip
 
Dale,
I sent you an email before seeing your distress message. I'll be making the fuel line block starting tomorrow. I had to catch-up on earlier commitment jobs and had an unscheduled downtime on the CNC.
Dynomite and Fully Vetted provided me with the samples I needed to get my specs. Sorry you had an issue with the blown fuse. Take care, Carter

PS: I have a list started of who wanted/needed the item just need to find it. If you remember contacting me about needing one please speak up here and I'll for sure have you down for one. No price yet but it's not gonna break the bank and shipping in the US will be included.

Thanks to all who support CT Machining. You are appreciated!!!:handshak:

carter200 09-04-2013 11:47 PM
Re: Searching for a Fuel Line Clip
 
Cliff,
I will certainly post a pic and price when done. I have not forgotten that you wanted a billet oil dipstick handle, too. Let the blinging begin :dancing

carter200 09-05-2013 06:36 PM
Billet fuel Line bracket list
 
I found the list I started. The following stated they wanted one:

David Adams
Dynomite (2)
=Jeff=
Jim Zorgias
1991ZR1
Dale Zimmerman
HawaiiZR-1
GCylon
Ted Feder
Whale (2)


Just give me heads-up and I'll add you to the list if you want one.....;)

carter200 09-05-2013 09:56 PM
Re: Billet fuel Line bracket list
 
Quote:
Originally Posted by Dynomite (Post 182194)
Let me see what you come up with......may want two. Can you etch in red anything on the ends?
Cliff,
I do not "etch". I engrave :). There is not a whole bunch of room to put more than a few characters and the color is up to the customer. I thought you wanted 2 anyways cause of the octane ratings?

carter200 09-05-2013 10:30 PM
Re: Billet fuel Line bracket list
 
Quote:
Originally Posted by Dynomite (Post 182210)
OK..Two...one for 90' and one for 91' ;)
Correct me if I'm wrong but aren't they all the same and before you were wanting "87" and "91" on the side?

carter200 09-06-2013 07:36 PM
Fuel Line bracket
 
Looked at mine as I was getting a few measurements and dang if mine is not broken, too. Guess it's good I'm machining these.

Great progress today on the protype and WILL have a finished one (pics, too) by Wednesday. I think it'll be Tuesday but I'll give a little cushion for any unforeseen issues.

The prototype so far has me very excited as it looks great and know that this will help alot of owners.

Check your clip closely and get your name added to the list early.

Thanks, Carter :cheers:

HAWAIIZR-1 09-07-2013 12:23 AM
Re: Billet fuel Line bracket list
 
Carter,

Please add me to your list. You know I'm all over improvement and bling. I'll hit you up for some things I want done for the new Harley too........:dancing

Quote:
Originally Posted by carter200 (Post 182193)
I found the list I started. The following stated they wanted one:

David Adams
Dynomite (2)
=Jeff=
Jim Zorgias
1991ZR1
Dale Zimmerman
HawaiiZR-1

Just give me heads-up and I'll add you to the list if you want one.....;)

HAWAIIZR-1 09-07-2013 12:39 AM
Re: Billet fuel Line bracket list
 
Quote:
Originally Posted by Dynomite (Post 182278)
Craig.....Another item comes to mind which I am exploring. The Oil Dip Stick Handle out of Billet Aluminum with OIL engraved in red letters. One you attach with a set screw to your existing dip stick. See Item #3 of Post 19 - LT5 Lubrication Tricks

Carter...this one is a test and it definitely works....I am sure you can improve on it :thumbsup:
Thanks Cliff. I might consider that. I have a chromed (plastic) stock dipstick that I can't even remember where I got it from back in the day. That is pretty cool.................

carter200 09-07-2013 01:31 AM
Re: Billet fuel Line bracket list
 
Quote:
Originally Posted by Dynomite (Post 182278)
Craig.....Another item comes to mind which I am exploring. The Oil Dip Stick Handle out of Billet Aluminum with OIL engraved in red letters. One you attach with a set screw to your existing dip stick. See Item #3 of Post 19 - LT5 Lubrication Tricks

Carter...this one is a test and it definitely works....I am sure you can improve on it :thumbsup:

Carter on a Billet Aluminum Dipstick Handle could make the base smaller diameter and the slot for the Flat of the existing Dipstick tighter so one does not have to use several small washers to compress the end of the Dipstick in the New Billet Aluminum Handle. And Carter could engrave AMSOIL 10W-40 rather than OIL on the top :D

The Existing Dipstick end with that FLAT once the Stock Plastic Handle is removed is very amenable to installing a Billet Aluminum Handle for sure :thumbsup:
Cliff,
Yes, I can and will make the Billet handle. Engraving other than OIL will be an option. I WILL paint in the OIL in red. This will be the next "project" in line after the Billet Fuel Line bracket. :cheers:

GOLDCYLON 09-07-2013 07:28 PM
Re: Searching for a Fuel Line Clip
 
How about just like the original with a billet black handle and white lettering? I'd be a playa

carter200 09-07-2013 08:14 PM
Billet Fuel Line Bracket
 
GC,
I'll put you down for one. We'll discuss details later.....;)

carter200 09-11-2013 04:18 PM
Re: Searching for a Fuel Line Clip
 
4 Attachment(s)
The Billet fuel line bracket prototype is done and installed on my Z. I sent pics to Dynomite and he immediately ordered 2 which are paid for now. There is NO way that the fuel lines can move and fit them perfectly.
I am enclosing pics of the unit. The price is $35 plain and $40 with engraving. Both prices include shipping in the US. Thanks for your support, Carter

PS: I'll be contacting the people that signed up on the list and if you want the part PM or just post here and I'll contact you with the payment info.

Attachment 2688

Attachment 2690

Attachment 2691

carter200 09-11-2013 07:28 PM
Re: Searching for a Fuel Line Clip
 
The location of the Billet fuel line bracket is just fine and functions/looks much better than stock. ;)

HAWAIIZR-1 09-12-2013 12:08 AM
Re: Searching for a Fuel Line Clip
 
Carter,

That is just friggin awesome and nothing less expected from you. I'll send payment.

Thanks again!

Craig

1991ZR1 09-12-2013 04:14 AM
Re: Searching for a Fuel Line Clip
 
Carter,

I need the fuel line bracket. Please send instructions.

Myles

carter200 09-12-2013 01:35 PM
Re: Searching for a Fuel Line Clip
 
Quote:
Originally Posted by 1991ZR1 (Post 182636)
Carter,

I need the fuel line bracket. Please send instructions.

Myles
PM sent and great to hear from you.........:handshak:

whale 09-13-2013 09:54 AM
Re: Searching for a Fuel Line Clip
 
Carter, hello I would like to but two brackets. Just the bracket plain. Email me at whale1107@gmail.com..............thanks wayne

carter200 09-13-2013 01:09 PM
Re: Searching for a Fuel Line Clip
 
Quote:
Originally Posted by whale (Post 182726)
Carter, hello I would like to but two brackets. Just the bracket plain. Email me at whale1107@gmail.com..............thanks wayne
Wayne,
Email has been sent to you and thanks for your order, Carter :)

carter200 09-18-2013 01:23 AM
Re: Searching for a Fuel Line Clip
 
Whale,
Just sent you a PM..........


Fully Vetted,
Thanks for your order and payment. :cheers:

carter200 09-26-2013 08:33 PM
Billet fuel line brackets for sale...........
 
Everything is on schedule and plan on mailing out starting next Friday or sooner. Thanks, Carter ;)

carter200 10-11-2013 08:06 PM
Billet fuel line brackets
 
Finally, I have finished the first order of the billet fuel line brackets. I will be starting on a new batch of brackets starting Wednesday so there will be some on hand.

Thanks all who ordered and waited patiently. I have never had so many distractions from being able to work in the shop as I had with this. Thanks again for your understanding, Carter :cheers:

JimZRyd 10-18-2013 08:42 PM
Re: Searching for a Fuel Line Clip
 
Received my billet fuel line bracket today....Man talk about nice! The quality that you'd expect from a reputable vendor like Carter! Super nice work Brother!!!

Thanks!

Jim:fahne:

HAWAIIZR-1 10-18-2013 08:51 PM
Re: Searching for a Fuel Line Clip
 
Carter,

I can't wait to receive my bracket to add to all your other items on the Z. I'm thinking about some of your custom work on the Harley Nightster to put some CT Machining bling on it too.:dancing

HAWAIIZR-1 10-18-2013 10:35 PM
Re: Searching for a Fuel Line Clip
 
Quote:
Originally Posted by Dynomite (Post 185710)
I am standing by my mail box tomorrow...just in case.....I will post photos here of the Carter Fuel Line Clip installed :cheers:
Cliff,

Somehow I had a vision of you actually standing by your mailbox with an umbrella even in pouring rain..............

http://i78.photobucket.com/albums/j8...ps815d4345.jpg

I can't wait to see your post as they are always full of detail and interesting.:cheers:

HAWAIIZR-1 10-18-2013 10:51 PM
Re: Searching for a Fuel Line Clip
 
Quote:
Originally Posted by Dynomite (Post 185715)
:sign10::sign10::sign10: Where did you find that?
Where else, I googled it.......I thought you might like that.

http://www.etsy.com/listing/16043993...?ref=related-1

Speaking of google, I saw that their stock hit $1000 a share.......man I wish I invested in their stocks years ago as I would have ordered a C7 Stingray as my daily driver if so.

carter200 10-18-2013 11:41 PM
Re: Searching for a Fuel Line Clip
 
Quote:
Originally Posted by Dynomite (Post 185710)
I am standing by my mail box tomorrow...just in case.....I will post photos here of the Carter Fuel Line Clip installed :cheers:
Cliff,
I just finished painting your engraving. You might want to take a break on the PO Box vigil for a few more days. I'll be mailing out to you on Monday.

Jim,
Thanks for the kind words. Pics from both of you would be great! Again thanks, Carter :cheers:

1991ZR1 10-20-2013 03:43 AM
Re: Searching for a Fuel Line Clip
 
I received the fuel line clip today. I decided to try installation right away. Things did not go well. Nothing to do with the clip though. When I tried to take the nut off, the stud came out instead. I'm thinking of using epoxy when screwing it back in. When I took the old broken clip off, I dropped it into the engine compartment. It made a sound like it hit the exhaust shielding. It did not fall to the ground and I can't see where it went. I'm afraid it may be inside the shielding and if I leave it there it will melt when things heat up. One day I'm going to jack the car up and try to find the clip from under the car.

HAWAIIZR-1 10-20-2013 03:56 AM
Re: Searching for a Fuel Line Clip
 
Quote:
Originally Posted by Dynomite (Post 185729)


Craig did this...it is all his fault.....:D

http://i287.photobucket.com/albums/l...2632fc84ec.jpg
Hey Cliff,

Did you order the vintage button from the link? They only have 1 left.

Maybe Carter can make you some billet center caps for your wheels with this design? :p

carter200 10-20-2013 04:33 PM
Re: Searching for a Fuel Line Clip
 
Quote:
Originally Posted by Dynomite (Post 185809)
I just noticed that....yes....I got it......[/B]:D
That is sooooo funny......thanks there Craig :cheers:



The stud coming out is not unusual.....I think I would just screw the stud back in tight but not so tight you strip the threads in that box material.

You can always epoxy the stud if you strip the threads or if you want to make the stud permanent later. If I am not mistaken, Carter machined a recess for the stud collar so the fuel line clip is snugged up tight against the box and not just snugged up tight on the collar of the stud.

That little clip melting somewhere is really not a big deal....just let it melt and when you remove the exhaust adding headers you will find the little crisp piece of what is left. It should not hurt anything where it dropped. I have found all sorts of dropped items including injectors down among the suspension components so guys/gals dropping things and leaving them is not unusual either :p
Yes, I machined an inside step to clear the stud flange and to allow the billet fuel line bracket to rest flush on the boss. When I installed my billet fuel line bracket the stud was loose on mine, too.
I just retightened it and installed the bracket with no issues. Be sure to orient the two halves of the billet fuel line bracket by mating the two sides with the RED mark on each half.
Thanks again, Carter :handshak:

carter200 10-21-2013 06:17 PM
Re: Searching for a Fuel Line Clip
 
Quote:
Originally Posted by HAWAIIZR-1 (Post 185807)
Hey Cliff,

Did you order the vintage button from the link? They only have 1 left.

Maybe Carter can make you some billet center caps for your wheels with this design? :p
Yes, I CAN do a set of center caps like the :p
Remember it's only money.....

carter200 10-25-2013 04:35 PM
Re: Searching for a Fuel Line Clip
 
Quote:
Originally Posted by Dynomite (Post 186263)
Carter Fuel Line Bracket Installed.

Very nice (I mean extremely nice) Carter :thumbsup:

http://i287.photobucket.com/albums/l...273fdfa836.jpg

Bracket Top and Bottom................................................Bracket Center


91 Octane on one end of Bracket and 87 Octane on other end of Bracket.
91 Octane.................................................. .................87 Octane
Cliff,
You should be able to get the two halves to come together to make the 87 look better. Let me know if any issues, Carter :cheers:

carter200 10-25-2013 06:41 PM
Re: Searching for a Fuel Line Clip
 
Quote:
Originally Posted by Dynomite (Post 186269)
I was sooooo excited I did not clamp it tight.....;)
Can you post another pic with it clamped tight? I would like it as the other makes my work look not so good..........You could even replace the untightened pic with the "tightened" pic. Thanks, Cliff, I appreciate it, Carter :cheers:

JimZRyd 10-26-2013 05:51 PM
Re: Searching for a Fuel Line Clip
 
Here's my bracket that I got from Carter last week. The quality of his work is extremely nice! It was more difficult than I expected to line up the fuel lines to where they would sit in the bracket correctly but once in place they look fantastic! Here goes a couple of pics...

http://i18.photobucket.com/albums/b1...psff59c24c.jpg
http://i18.photobucket.com/albums/b1...ps5c073fd4.jpg
http://i18.photobucket.com/albums/b1...psfcae5370.jpg

HAWAIIZR-1 01-27-2014 01:06 AM
Re: Searching for a Fuel Line Clip
 
Carter,

Thanks again! I finally got around to installing the clamp/bracket today. It did not work like the photos in the post above, but I was able to get the clamps to close flush after pulling the entire end part past so that the bracket is holding just the steel braided part line. No matter what I did (red marks matching and all, even flipped around thinking one opening was larger) it would not clamp flush.


All times are GMT -4. The time now is 06:26 PM.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2025