Going through DEQ Emission testing
 

Since I know this is a subject that comes up often. I was up for renewal and just ran my car through.

368 cube
Stage 1 cams
Stainless works headers with magnaflow cats.

http://www.pnwzr1.com/images/DEQ.JPG

Re: Going through DEq Emission testing
 

Congrats :thumbsup: Now that youhave that out of the way maybe you can mail me the item you called me about :p

Re: Going through DEq Emission testing
 

LOL, calling you..... :cheers:

Re: Going through DEq Emission testing
 

Thanks for the call. I needed the laugh :cheers:

Re: Going through DEq Emission testing
 

CO+CO2 %? What do they measure that for?

Also, what the heck? Granola eating states like Washington have HC limits of 150 PPM at cruise, while "sic semper tyrannis" states like Virginia have limits of about 53 PPM? :icon_scra

Re: Going through DEq Emission testing
 

Hey Jeff do your headers have the A.I.R. system hooked up?

Does your state require a visual on the equipment?

Re: Going through DEq Emission testing
 

i would also be very intersted to know about any visual inspections or other types of requirements for washington state as i will likely be moving back in the next couple years. not sure if i told you this jeff but i grew up just a few miles from your shop.

Chris

Re: Going through DEq Emission testing
 

interesting....
VA has real strict tailpipe standards, dont know how anythign passes out there. We have tougher visuals but tailpipe is much more lax.

Re: Going through DEq Emission testing
 

They do a half *** visual. They have mirrors on a wand, but it can't see under the vette. The most they will see is a floor pan.

They do a gas cap check, a idle test and a rolling 25 mph cruise. No under hood.

Re: Going through DEq Emission testing
 

Do they pressurize the tank? Just started that out here and do a "leakdown" of sorts. Guess if any assocaited rubber lines are cracked you fail.