Re: Alternator upgrade
 

Second chance do you have a post/ write up of the Spal fan install?

Re: Alternator upgrade
 

Here you go.
https://www.zr1.net/forum/showthread.php?t=30609

Re: Alternator upgrade
 

Did you run the additional 8 gauge wire to the alternator? If so where does the wire terminate? Thanks for the thread! I already got the altenator you recommended

Re: Alternator upgrade
 

If you are asking Secondchance, he said he did in his first post

Re: Alternator upgrade
 

Is there any advantage to adding the 8 gauge and 18 gauge for the fan motor without installing a higher amp unit? I have a brand new stock one form Jerrys already installed.... exercise in futility?

Re: Alternator upgrade
 

8 ga wire was added between th alternator output to the battery to allow for additional current and 18 ga between the battery to the fan motor. I’m not an electrical engineer and above wiring upgrades were replication of what Marc does when he upped alternator amperage on another WAZOO Z.
Thicker wire alone, may not have much effect.

Re: Alternator upgrade
 

Actually the thicker the wire the LESS resistance but the thicker the wire the more current can get pushed through without burning it up.. Heat is generated by the resistance

Re: Alternator upgrade
 

[QUOTE=-=Jeff=-;309294]Actually the thicker the wire the LESS resistance but the thicker the wire the more current can get pushed through without burning it up.. Heat is generated by the resistance[/QUOTE

Without alternator with higher output, what effect would larger ga wire have on fan motor?

Re: Alternator upgrade
 

More power/current flow to the fans. So the fans would benefit of the larger wiring as there will be less power drop at the fan

Re: Alternator upgrade
 

There is your answer 32valvZ.