ZR-1 Net Registry Forums

ZR-1 Net Registry Forums (http://zr1.net/forum/index.php)
-   C4 ZR-1 Technical Postings (http://zr1.net/forum/forumdisplay.php?f=9)
-   -   #473 Trans to ZF Doc (http://zr1.net/forum/showthread.php?t=27926)

jss06c6 06-24-2017 06:49 PM

Re: #473 Trans to ZF Doc
 
Even cleaned and aired up the mini spare.. only had the huevos to go to 50 psi!!!

Sent from my XT1585 using ZR-1 Net Registry mobile app

efnfast 06-24-2017 07:25 PM

Re: #473 Trans to ZF Doc
 
Quote:

Originally Posted by G8nightman (Post 263487)
Is the Fidanza new how much do you want for it?

I bought it used and had it resurfaced. I ended up installing a Ram. $250 shipped.

jss06c6 07-17-2017 11:00 PM

Re: #473 Trans to ZF Doc
 
4 Attachment(s)
Ok, back to the original thread.. Dual Mass installed. New clutch and pilot bearing. Remanufactured PP (Valeo) from Bill at ZR51 performance. Clutch disc from LUK. Ready for transmission from Bill B..[ATTACH][ATTACH][ATTACH][ATTACH]

Sent from my XT1585 using ZR-1 Net Registry mobile app

jss06c6 07-17-2017 11:09 PM

Re: #473 Trans to ZF Doc
 
4 Attachment(s)
1st Gear Synch and other rough gears in the transmission..[ATTACH][ATTACH][ATTACH][ATTACH]

Sent from my XT1585 using ZR-1 Net Registry mobile app

GOLDCYLON 07-17-2017 11:11 PM

Re: #473 Trans to ZF Doc
 
Quote:

Originally Posted by jss06c6 (Post 264860)
Ok, back to the original thread.. Dual Mass installed. New clutch and pilot bearing. Remanufactured PP (Valeo) from Bill at ZR51 performance. Clutch disc from LUK. Ready for transmission from Bill B..[ATTACH][ATTACH][ATTACH][ATTACH]

Sent from my XT1585 using ZR-1 Net Registry mobile app

You will be happy I just refreshed my clutch and hydraulic's and went back to dual mass. I hated my lightweight flywheel as the car sounded horrible unless the clutch was pushed it. Never again. Bill made it right again. GC

jss06c6 07-17-2017 11:11 PM

Re: #473 Trans to ZF Doc
 
Good (top) compared to bad (bottom)

Sent from my XT1585 using ZR-1 Net Registry mobile app

BigJohn 07-18-2017 06:11 AM

Re: #473 Trans to ZF Doc
 
Quote:

Originally Posted by GOLDCYLON (Post 264862)
You will be happy I just refreshed my clutch and hydraulic's and went back to dual mass. I hated my lightweight flywheel as the car sounded horrible unless the clutch was pushed it. Never again. Bill made it right again. GC

Now you see what happens when you get old!

gtcollins@maxnet.co.nz 07-18-2017 07:04 AM

Re: #473 Trans to ZF Doc
 
Hi what mileage has your ZR-1 clock up
Regards Glen


Sent from my SM-G930F using ZR-1 Net Registry mobile app

jss06c6 07-18-2017 08:00 AM

Re: #473 Trans to ZF Doc
 
#473 is at 40,000 now..

Sent from my XT1585 using ZR-1 Net Registry mobile app

jss06c6 08-21-2017 01:49 PM

Re: #473 Trans to ZF Doc
 
Got the transmission back from Bill Boudreaux and got it reinstalled. Pretty painless so far. Only thing left underneath is to reinstall the exhaust. Inside is ready to reinstall a new shift boot and button up the center console. Hopefully I'll have it on the road by this Wednesday and get some test drives in to see how the conversion back to Dual Mass shapes up. Anxious to get it on the road again!

Sent from my XT1585 using ZR-1 Net Registry mobile app


All times are GMT -4. The time now is 07:19 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2025