ZR-1 Net Registry Forums

ZR-1 Net Registry Forums (http://zr1.net/forum/index.php)
-   C4 ZR-1 Technical Postings (http://zr1.net/forum/forumdisplay.php?f=9)
-   -   Help! 1st Time Removing Plenum....now rough idle (http://zr1.net/forum/showthread.php?t=26719)

XfireZ51 09-18-2016 12:30 AM

Re: Help! 1st Time Removing Plenum....now rough idle
 
Quote:

Originally Posted by max76 (Post 247639)
Hi dynomite, i check the connector on the passenger side, it Was loose!!!
I close it and reset the error, the infl rest light and the man with safety belt are disapears!!
Thanks a lot!!!

:dancing:dancing:cheers:

max76 09-18-2016 03:48 AM

Re: Help! 1st Time Removing Plenum....now rough idle
 
Yes dynomite...now i have an other light on...abs service!!!
I dont remember the number code but its an issue on rear wheels.
I already clean the abs sensors reset code and after few kilometers the light come on :-(

max76 09-18-2016 08:56 AM

Re: Help! 1st Time Removing Plenum....now rough idle
 
If i well remember the codes are 26 and 36...i hope i m not the only one!!!!!

batchman 09-26-2016 03:26 PM

Re: Help! 1st Time Removing Plenum....now rough idle
 
Hi Max,

You may get more response if you bring up an old post with a similar problem to what ever you are facing, or a new post on that issue.

I don't know the code #s but have had ABS faults due to loose wheel hubs, which can happen when you run hard on modern performance tires. Probably worth checking by jacking the car up and shaking each wheel (left/right and up/down), any more than just a little play (both directions) indicates it's time to replace. It usually takes a lot of play before ABS has trouble though.

Hope that helps,
- Jeff


All times are GMT -4. The time now is 09:37 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2025