ZR-1 Net Registry Forums - Single Mass Flywheels

Page 3 of 3

Show 40 post(s) from this thread on one page

ZR-1 Net Registry Forums (http://zr1.net/forum/index.php)

- C4 ZR-1 Technical Postings (http://zr1.net/forum/forumdisplay.php?f=9)

- - Single Mass Flywheels (http://zr1.net/forum/showthread.php?t=26103)

A26B	02-09-2016 05:04 PM

Re: Single Mass Flywheels

Thanks for your post Jitse!

A26B	02-09-2016 05:05 PM

Re: Single Mass Flywheels

Quote:

Originally Posted by -=Jeff=- (Post 238141)

So for a stock HP set-up If I needed to swap the dual mass I would do the 22# flywheel with sprung hub disc. That way I have some Dampening

Yes
Flywheel: http://www.jerrysgaskets.com/flywhee...let-90-95-0b1/

Clutch Disc:http://www.jerrysgaskets.com/clutch-...hub-89-95-000/

Pressure Plate: Stock/OEM pull-release

edram454

02-09-2016 08:52 PM

Re: Single Mass Flywheels

Quote:

Originally Posted by XfireZ51 (Post 238145)

That's what I have been using w my Fidanza. It's a Camaro LT-1 sprung hub disc.

I also have a camaro sprung hub clutch with my fidanza and hear no rattle whatsoever with the benefits of a super light flywheel is well worth the money.

ed ramos #3028

-=Jeff=-

02-09-2016 10:38 PM

Re: Single Mass Flywheels

Quote:

Originally Posted by XfireZ51 (Post 238145)

That's what I have been using w my Fidanza. It's a Camaro LT-1 sprung hub disc.

I know.. just confirming the set-up with the 22#

All times are GMT -4. The time now is 06:28 AM.

Page 3 of 3

Show 40 post(s) from this thread on one page