ZR-1 Net Registry Forums

ZR-1 Net Registry Forums (http://zr1.net/forum/index.php)
-   C4 ZR-1 Technical Postings (http://zr1.net/forum/forumdisplay.php?f=9)
-   -   Switched to RAM dual-disc clutch, some questions (http://zr1.net/forum/showthread.php?t=24190)

XfireZ51 11-13-2014 04:39 PM

Re: Switched to RAM dual-disc clutch, some questions
 
Quote:

Originally Posted by rkreigh (Post 215745)
you would think the gear knock would drive the knock sensor crazy but they seem to be tuned to a different frequency or something and I don't see any knock at all

does sound like a woodpecker trying to get out of the tranny though

I've contemplated going back to a stock dual mass as the gear rattle is beyond annoying on the big cam cars and having a bit heavier flywheel is better for driving on the street

especially with stock gears.

I do like the way the old LSV winds up when provoked with it though!

To answer my own question, I would be surprised if it did set off KR. The filters for the sensor are pretty specific ie sensor from an L98 won't work on LT-5. I have done scans of my motor with the Fidanza and any knock detection only shows up at start-up. Other than that, I don't see any knock I could attribute to the trans. Decel, accel, cruise does not show anything. I might get a brief period of knock, mainly on decel at lower rpm so it really is inconsequential. But other than hot idle, I don't get any gear rattle at cruise or when clutch is engaged.


All times are GMT -4. The time now is 11:58 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2025