ZR-1 Net Registry Forums - new owner 1990 zr1

Page 3 of 3

Show 40 post(s) from this thread on one page

ZR-1 Net Registry Forums (http://zr1.net/forum/index.php)

- C4 ZR-1 Technical Postings (http://zr1.net/forum/forumdisplay.php?f=9)

- - new owner 1990 zr1 (http://zr1.net/forum/showthread.php?t=21418)

8cam	10-18-2013 11:30 PM

Re: Water Pump Installation

Quote:

Originally Posted by WARP TEN (Post 185640)

Didn't someone just post in another thread that the bolt sizes noted in the FSM are indicated incorrectly? --Bob

I just pulled my water pump a couple days ago using this diagram, and all the bolts were a perfect match. Made my own drawing to put the bolts on so I know they matched. Will also make it easy to install the new pump.

rikker

10-19-2013 06:58 AM

Re: new owner 1990 zr1

YES I GOT A NEW RAD,WPUMP ,HOSES,AND THERMOSTAT.

efnfast

10-19-2013 07:09 AM

Re: new owner 1990 zr1

Be careful of your thermostat, there were some bad ones out there.
http://www.zr1specialist.com/HAT%20W...thermostat.htm

rikker

10-19-2013 06:12 PM

Re: new owner 1990 zr1

Got a stat from napa, does the tensioner need to come out and there is a bracket under the altenator does that come out.ALMOST THERE

8cam	10-20-2013 09:44 AM

Re: new owner 1990 zr1

Pulling the tensioner is like a 5-minute job and makes everything else easier to get to. Stand on the passenger side, grab the tensioner and pull towards you. The belt will just about fall off. Then unbolt the tensioner and remove. Enjoy the increased access. :)

All times are GMT -4. The time now is 08:07 AM.

Page 3 of 3

Show 40 post(s) from this thread on one page