ZR-1 Net Registry Forums - ok tearing apart the ZR-1 for paint

ZR-1 Net Registry Forums (http://zr1.net/forum/index.php)

- C4 ZR-1 Technical Postings (http://zr1.net/forum/forumdisplay.php?f=9)

- - ok tearing apart the ZR-1 for paint (http://zr1.net/forum/showthread.php?t=11706)

Re: ok tearing apart the ZR-1 for paint

:cheers: So right you go way further than I want to for sure, keep them pics coming :cheers:

Re: ok tearing apart the ZR-1 for paint

Quote:

Originally Posted by phrogs (Post 89243)

you are correct about pulling the hood but all im doing in those pics was the initial primer The hood is off now because it needs more work and more primer and even more sanding im thinking about pulling off the doors off this car as well not to worry this car will be pulled apart for paint.

heres the pics of #354's doors and hood getting paint.

http://i150.photobucket.com/albums/s...ppypics140.jpg

I hate all these rock chips they really do a job on the paint, I think this car was daily driven behind gravel truck on a dirt road covered in rocks it is peppered. I really wanted to get this done before next week but im not going to kill myself to make it happen.

I am using 2k primer everything I have for this job is Sherwin williams ultra 7000 series products ill have to get me some of that eastwood paint for the bottom of the hood.

Any ideas on freshening up the plastic wheel wells?

if there is undercoating or black paint on fenderwells, spray paint stripper on them and let them sit , otherwise use acrylic solvent as the stripper will make them look new, it takes a little of the deep black out of the finish.

Re: ok tearing apart the ZR-1 for paint

how is this progressing along?

Re: ok tearing apart the ZR-1 for paint

Ok the paint job is on hold at the moment but will return in a few months.
I have started school and It seems my 90 is one of the Vettes that had a complete paint failure, I am finding paint peeling off in areas under the weatherstripping moldings. so It will need to be completely stripped off.

So im in school for paint and refinishing so I will be able to make a better post in the future.

stay tuned this spring.

Re: ok tearing apart the ZR-1 for paint

Reserected!!

I'm back to work on this ZR-1

The paint failure is a real bitch I tell ya more photos coming I promise!

Re: ok tearing apart the ZR-1 for paint

Quote:

Originally Posted by phrogs (Post 91190)

YiKEs! Spring 2015? 3015?

Mine is going under the brush soon - hope it's not the same 'this Spring', although we never know....................

Re: ok tearing apart the ZR-1 for paint

Quote:

Originally Posted by phrogs (Post 209642)

Reserected!!

I'm back to work on this ZR-1

The paint failure is a real bitch I tell ya more photos coming I promise!

Johnny welcome back:cheers: You are the man for this job. Are you headed to Carlisle ?

Re: ok tearing apart the ZR-1 for paint

Quote:

Originally Posted by louispf (Post 209702)

Johnny welcome back:cheers: You are the man for this job. Are you headed to Carlisle ?

Yep I'll be there!

The paint is so bad on this car im not so sure Ill bring it but well see.

The plan was to have it done for carslile but the paint is so bad on this I had to add way more Hrs to sanding it getting ready for primer.

So I wanted primer on this monday and im still dealing with this crap paint job from GM.

Re: ok tearing apart the ZR-1 for paint

Ok primer going in tomorrow, took a lot of time to remove the peeling paint.

Damn pain in the but. I have so much bare SMC I need to get it in primer. I'll get to the good after I get this shot. Then yank the hood off let the primer sit for a few days and get the hood done.