ZR-1 Net Registry Forums - c5 Z06 Calipers

Page 2 of 2

Show 40 post(s) from this thread on one page

ZR-1 Net Registry Forums (http://zr1.net/forum/index.php)

- C4 ZR-1 Technical Postings (http://zr1.net/forum/forumdisplay.php?f=9)

- - c5 Z06 Calipers (http://zr1.net/forum/showthread.php?t=4564)

Jeffvette

01-05-2008 11:30 PM

Re: c5 Z06 Calipers

Quote:

Originally Posted by RiceEatingZR1

Will they fit with the stock 5 point rims?

Yes, they are the same size as the C5 calipers, just a little revision to make them better. There is plenty of clearance with the 5 spoke rims.

Jeffvette

01-05-2008 11:31 PM

Re: c5 Z06 Calipers

Quote:

Originally Posted by cuisinartvette

I like those!! What would a complete setup cost for those thinking about it, Jeff?

The C6 base calipers come in graphite. They are roughly 105 each plus the cost to refinish them.

cuisinartvette

01-05-2008 11:38 PM

Re: c5 Z06 Calipers

Ooh-hoooooo...Graphiote calipers are on the to do list for next year sometime then, those look sharp. Nice work dude.

Jagdpanzer

01-06-2008 12:39 AM

Re: c5 Z06 Calipers

Quote:

Originally Posted by Jeffvette

The C6 base calipers come in graphite. They are roughly 105 each plus the cost to refinish them.

What do you do for rotors?

Jeffvette

01-06-2008 12:41 AM

Re: c5 Z06 Calipers

You can use either C5 or base c6 rotors.

Jagdpanzer

01-06-2008 12:50 AM

Re: c5 Z06 Calipers

Jeff,
Can you supply the whole kit to convert the front brakes from C4 to C6 base calipers? and about how much $ are we looking at?

Jeffvette

01-06-2008 12:58 AM

Re: c5 Z06 Calipers

Let me work you up a quote. You want stainless lines?

HADI-ZR1

01-06-2008 04:01 AM

Re: c5 Z06 Calipers

and what about the rear?
any better rotors and calipers for our Zr1?

Jagdpanzer

01-06-2008 09:45 AM

Re: c5 Z06 Calipers

Quote:

Originally Posted by Jeffvette

You want stainless lines?

Sure, for the rear to.

djpatrick35

01-12-2008 02:21 AM

Re: c5 Z06 Calipers

What would be the total cost including parts w/ the C6 calipers?

All times are GMT -4. The time now is 09:45 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page