Re: Reluctantly joining the catch can club
 

Nicely done. I am happy to report that the catch can has reduced the soot on the tips tremendously. Since I installed this can, I have cleaned the tips once. Cleaning the tips used to be every weekend after a few drives.

Re: Reluctantly joining the catch can club
 

NIce mod Steve and well done! Let us know the end results.

Re: Reluctantly joining the catch can club
 

I am now ready for MR9 snd BG.

Re: Reluctantly joining the catch can club
 

Steve,
My setup is very similar to yours using the booster studs. I strived for a clean approach keeping line lengths short using stainless tubing and printed pipes for the bends. The tubing brackets have a bushing in the them so that I can torque the plenum without crushing the plastic brackets. Here are a few pics.

https://zr1.net/forum/picture.php?al...pictureid=5080
https://zr1.net/forum/picture.php?al...pictureid=5081
https://zr1.net/forum/picture.php?al...pictureid=5083
https://zr1.net/forum/picture.php?al...pictureid=5084

It definitely works - there are usually a couple of tablespoons of oil in there when I empty it.

Re: Reluctantly joining the catch can club
 

Nice install BlackZR1! I just ordered my catch can yesterday and was planning on making custom hard lines (albeit routed differently) like you've done. I'm looking forward to seeing if it makes a good difference.

Re: Reluctantly joining the catch can club
 

Figured I would do a follow up on finally emptying my catch can after getting some interesting readings on the little dipstick. Oil level was over two inches deep. No wonder the exhaust tips stay clean now. No more big puffs of blue smoke when an aggressive downshift occurs. Both PVC valves rattle freely when you shake them. So far, the catch can has done its job perfectly and I will keep it in place.

Re: Reluctantly joining the catch can club
 

BlackZR1,

Is that a custom setup or where can you get it?

Re: Reluctantly joining the catch can club
 

Hey Dom,
Yes, a custom setup I fine-tuned over the course of a couple weeks. I am happy to share my gcode for the printed parts and a picture of my cardboard template for the bracket if you or anyone else is interested.

Thanks,
Roger

Sent from my SM-F721U using ZR-1 Net Registry mobile app

Re: Reluctantly joining the catch can club
 

Excellent work Roger. Don?t have knowledge of 3D printing nor a machine but I appreciate the offer. I think its a very clean install. If u decide to do a few more, please put me down for one,