ZR-1 Net Registry Forums - Jeal Carbon Fiber Intake

Page 2 of 2

Show 40 post(s) from this thread on one page

ZR-1 Net Registry Forums (http://zr1.net/forum/index.php)

- C4 ZR-1 General Postings (http://zr1.net/forum/forumdisplay.php?f=14)

- - Jeal Carbon Fiber Intake (http://zr1.net/forum/showthread.php?t=34312)

HAWAIIZR-1

09-05-2022 12:25 AM

Re: Jeal Carbon Fiber Intake

Quote:

Originally Posted by JT ZR-Won (Post 335221)

Yep, that's the one... what a great looking design! When I looked up under the car, it seems the reversed air lid is the way to go

It a nice piece for sure. It seems like all of the possibilities do not do much for performance and mostly for looks, but this one I do like regardless. I know LocoBob ran some dyno testing on various air boxes with hardly any difference between them.

I agree with you about getting cooler air has to be beneficial compared to the stock design of sucking in hot engine compartment air.

Sent from my iPhone using ZR-1 Net Registry

GOLDCYLON

09-09-2022 01:39 AM

Re: Jeal Carbon Fiber Intake

Quote:

Originally Posted by HAWAIIZR-1 (Post 335212)

Attachment 18533

Attachment 18534

Sent from my iPhone using ZR-1 Net Registry

Thanks Craig I had not seen one of those before. :cheers:

Dynomite

09-09-2022 02:51 AM

Re: Jeal Carbon Fiber Intake

Quote:

Originally Posted by viper107 (Post 335171)

or the other one that looks aluminum is awsome too,id love one of those!!

Quote:

Originally Posted by JT ZR-Won (Post 335174)

For sure! I believe that was the one designed by Marc Coplan. I should have bought one of those way back in the day.

Post 34 - Stainless Steel Air Box and Air Filter (L98 and LT5)

L98
https://cimg2.ibsrv.net/gimg/www.cor...f518301731.jpg

LT-5
https://cimg0.ibsrv.net/gimg/www.cor...1f5325bf66.jpg

aafc	09-11-2022 11:09 AM

Re: Jeal Carbon Fiber Intake

I 'am using the stock air filter assembly warped in DEL cool tape with the hole
in front bumper from the A/O engineering. I also have the bubble warp
aluminum between the filter housing and radiator housing. It is not glued
down but sandwiched between them. That alone will help reduce hot air
reaching the lower side of the filter.

http://www.zr1.net/forum/picture.php...pictureid=3970

HAWAIIZR-1

09-11-2022 09:01 PM

Re: Jeal Carbon Fiber Intake

Quote:

Originally Posted by GOLDCYLON (Post 335318)

Thanks Craig I had not seen one of those before. :cheers:

You are welcome Daryll. It is the only one that I like of our options.

BTW, my quest for the Cragar key was a bust after buying two possibilities. Thanks again for your help.

HAWAIIZR-1

09-11-2022 09:03 PM

Re: Jeal Carbon Fiber Intake

Quote:

Originally Posted by aafc (Post 335341)

I 'am using the stock air filter assembly warped in DEL cool tape with the hole

in front bumper from the A/O engineering. I also have the bubble warp

aluminum between the filter housing and radiator housing. It is not glued

down but sandwiched between them. That alone will help reduce hot air

reaching the lower side of the filter.

http://www.zr1.net/forum/picture.php...pictureid=3970

That is some great ingenuity and anything to help the air to be cooler is a great improvement.

Sent from my iPhone using ZR-1 Net Registry

aafc	09-13-2022 08:10 PM

Re: Jeal Carbon Fiber Intake

Here is the ZR-1 Splash front plate I modified to feed air into the stock air
filter housing. The hole in the front bumper was made for the A/O Engineering
cold air setup. I removed that and modified the opening to feed air straight
into the air filter. The ZR-1 Splash front plate was cut out to let air thru and
a black plastic screen installed to stop paper, small birds, etc from getting into
the filter. I still have a number of the ZR-1's Splash plate filler for the 1990
and 1991 thru 1995 for sale PM me for more information.
John

http://www.zr1.net/forum/picture.php...pictureid=4656

HAWAIIZR-1

09-15-2022 04:00 AM

Re: Jeal Carbon Fiber Intake

Quote:

Originally Posted by aafc (Post 335374)

Here is the ZR-1 Splash front plate I modified to feed air into the stock air

filter housing. The hole in the front bumper was made for the A/O Engineering

cold air setup. I removed that and modified the opening to feed air straight

into the air filter. The ZR-1 Splash front plate was cut out to let air thru and

a black plastic screen installed to stop paper, small birds, etc from getting into

the filter. I still have a number of the ZR-1's Splash plate filler for the 1990

and 1991 thru 1995 for sale PM me for more information.

John

http://www.zr1.net/forum/picture.php...pictureid=4656

Very cool! No pun intended. [emoji1360]🤙🏼

Sent from my iPhone using ZR-1 Net Registry

All times are GMT -4. The time now is 12:39 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page